A comparison between modal damping ratios identified by NExT-ERA and frequency domain impact test
نویسندگان
چکیده مقاله:
In this research, the modal parameters of a beam in free-free condition are extracted by performing different experiments in laboratory. For this purpose, two different techniques are employed. The first methodology is considered as a time domain method in Operational Modal Analysis. While the other one is frequency domain impact hammer test which is categorized as an Experimental Modal Analysis method and can be regarded as the most common method in modal analysis. Checking the results obtained by the two methods, one can notice a distinct inconsistency in modal damping ratios extracted by each method. However, based on recent publications on the subject, it can be inferred that the time domain methods have better accuracy in identifying damping ratios of structures. In order to confirm the findings, the effect of excitation is examined for each method by altering the excitation tool. For the operational method, it is concluded that changing the excitation tool will not have a noticeable influence on the identified damping ratios, whilst for the Experimental Modal Analysis method changing the hammer tip leads to inconsistent results for damping ratios. This study exemplifies the deficiency of Experimental Modal Analysis methods in their dependency on excitation techniques.
منابع مشابه
the relationship between eq, iq and test format: a study on test fairness
the major aim of this study was to investigate the relationship between iq, eq and test format in the light of test fairness considerations. this study took this relationship into account to see if people with different eq and iq performed differently on different test formats. to this end, 90 advanced learners of english form college of ferdowsi university of mashhad were chosen. they were ask...
15 صفحه اولOutput-only Modal Analysis of a Beam Via Frequency Domain Decomposition Method Using Noisy Data
The output data from a structure is the building block for output-only modal analysis. The structure response in the output data, however, is usually contaminated with noise. Naturally, the success of output-only methods in determining the modal parameters of a structure depends on noise level. In this paper, the possibility and accuracy of identifying the modal parameters of a simply supported...
متن کاملUncertainty Analysis of Identified Damping Ratios in Nonlinear Dynamic Systems
Obtaining accurate estimates of damping parameters from experimental measurements of structures has been a challenge in the civil engineering community. In general, the confidence level on the identified damping is much lower than that of the identified natural frequencies and mode shape components. Most system identification methods are based on linear system and control theories, while in rea...
متن کاملModal Analysis Turboshaft Test Stand Motor Designed by Using ANSYS
Today, modeling is critical for cognition and analysis of designers in industry field to meet their needs and design based on design requirements and available facilities to accelerate production and development of components of industrial engines. In this study, one structure has been proposed, designed, and analyzed based on turboshaft marine engine type to test this kind of engine in order t...
متن کاملComparison between a time-domain and a frequency-domain system for optical tomography.
The quality of phase and amplitude data from two medical optical tomography systems were compared. The two systems are a 32-channel time-domain system developed at University College London (UCL) and a 16-channel frequency-domain system developed at Helsinki University of Technology (HUT). Difference data measured from an inhomogeneous and a homogeneous phantom were compared with a finite-eleme...
متن کاملFrequency Domain Techniques for Operational Modal Analysis
Operational Modal Analysis, also known as Output Only Modal Analysis, has in the recent years, been used for determination of modal parameters of civil engineering structures and is now becoming widely used also for mechanical structures. The advantage of the method is that no artificial excitation needs to be applied to the structure, or force signals to be measured. In this paper, the non-par...
متن کاملمنابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ذخیره در منابع من قبلا به منابع من ذحیره شده{@ msg_add @}
عنوان ژورنال
دوره 8 شماره 1
صفحات 15- 24
تاریخ انتشار 2018-09-01
با دنبال کردن یک ژورنال هنگامی که شماره جدید این ژورنال منتشر می شود به شما از طریق ایمیل اطلاع داده می شود.
میزبانی شده توسط پلتفرم ابری doprax.com
copyright © 2015-2023