SAADAT RIZVI
Mechanical Engineering, IIT(BHU)
[ 1 ] - Effect of Different Welding Parameters on the Mechanical and Microstructural Properties of Stainless Steel 304H Welded Joints
In this research work, an attempt has been made to examine the different welding parameters which affect the weldability of 304H Austenitic stainless steel (ASS) welded joint using the proper filler wire. Chemical composition of filler wire was same as that of base metal. Further this study addressed the combined effect of various welding parameters on the metallurgical and mechanical propertie...
[ 2 ] - Effect of Friction Stir Welding on the Tensile Properties of AA6063 under Different Conditions
The basic aim of present study is to examine the effect of main friction stir welding (FSW) parameters on the quality of AA 6063 plate welds. Welding of AA6063 was carried out by a vertical milling machine, using different tools with a stationary shoulder and during the welding no external heating system was used. Different welding parameters studied were the tool rotational speed which varied ...
[ 3 ] - Integration of grey-based Taguchi technique in optimization of parameters process during the turning operation of 16MnCr5 steel
CNC turning is widely used as a manufacturing process through which unwanted material is removed to get the high degree of surface rough. In this research article, Taguchi technique was coupled with grey relation analysis (GRA) to optimize the turning parameters for simultaneous improvement of productivity, average surface roughness (Ra), and root mean square roughness (Rq).Taguchi technique L2...
[ 4 ] - Effect of Heat Input on Microstructural and Mechanical Properties of AISI 304 Welded Joint Via MIG Welding
In this experimental work, AISI 304 was welded via metal inert gas (MIG) welding process with Argon (Ar) as shielding gas. In the present study, AISI 304 was subjected to different heat input using a standard 308L electrode. Weld quality i.e. ultimate tensile strength, toughness, microhardness, and microstructure of AISI 304 were examined. Microstructures of welded joints were studied using sca...
Co-Authors