سید عبدالرضا گنجعلیخان نسب
دانشگاه شهید باهنر کرمان
[ 1 ] - بررسی عددی اثر تشعشعی گاز عملگر بر رفتار حرارتی مشعل متخلخل تابشی
در کار صورت گرفته به بررسی عملکرد یک مشعل متخلخل تحت اثر یک گاز عملگر تشعشعی پرداخته می شود. مشعل های متخلخل براساس تبدیل انرژی بین آنتالپی گاز عبوری و تشعشع حرارتی عمل می کنند. در مطالعه حاضر فازهای گاز و جامد در حالت عدم تعادل حرارتی قرار دارند و احتراق در مشعل توسط یک ناحیه تولید حرارت با توزیع غیریکنواخت سهموی شبیه سازی می شود. از آنجا که محیط متخلخل یک جسم خاکستری درنظر گرفته می شود، علاوه...
[ 2 ] - Inverse Boundary Design Problem of Combined Radiation-convection Heat Transfer in Laminar Recess Flow
In the present work, an inverse analysis of combined radiation and laminar forced convection heat transfer in a two-dimensional channel with variable cross sections is performed. The conjugate gradient method is used to find the temperature distribution over the heater surface to satisfy the prescribed temperature and heat flux distributions over the design surface. The fluid is considered to b...
[ 3 ] - Ivestigation of Entropy Generation in 3-D Laminar Forced Convection Flow over a Backward Facing Step with Bleeding
A numerical investigation of entropy generation in laminar forced convection of gas flow over a backward facing step in a horizontal duct under bleeding condition is presented. For calculation of entropy generation from the second law of thermodynamics in a forced convection flow, the velocity and temperature distributions are primary needed. For this purpose, the three-dimensional Cartesian co...
[ 4 ] - Three Dimensional Laminar Convection Flow of Radiating Gas over a Backward Facing Step in a Duct
In this study, three-dimensional simulations are presented for laminar forced convection flow of a radiating gas over a backward-facing step in rectangular duct. The fluid is treated as a gray, absorbing, emitting and scattering medium. The three-dimensional Cartesian coordinate system is used to solve the governing equations which are conservations of mass, momentum and energy. These equations...
[ 5 ] - ANALYSIS OF COMBINED CONDUCTION AND RADIATION HEAT TRANSFER IN A RECTANGULAR FURNACE INCLUDING TWO FLAMES
Abstract: The present study deals the theoretical modeling aspects of coupled conductive and radiative heat transfer in the presence of absorbing, emitting and scattering gray medium within two-dimensional square furnace including two flames. The gray radiative medium is bounded by isothermal walls which are considered to be opaque, diffuse and gray. The well known discrete ordinate method (DOM...
[ 6 ] - Numerical simulation of a three-layered radiant porous heat exchanger including lattice Boltzmann simulation of fluid flow
This paper deals with the hydrodynamic and thermal analysis of a new type of porous heat exchanger (PHE). This system operates based on energy conversion between gas enthalpy and thermal radiation. The proposed PHE has one high temperature (HT) and two heat recovery (HR1 and HR2) sections. In HT section, the enthalpy of flowing high temperature gas flow that is converted to thermal radiation em...
[ 7 ] - Thermohydrodynamic Characteristics of Journal Bearings Running under Turbulent Condition
A thermohydrodynamic (THD) analysis of turbulent flow in journal bearings is presented based on the computational fluid dynamic (CFD) techniques. The bearing has infinite length and operates under incompressible and steady conditions. In this analysis, the numerical solution of Navier-Stokes equations with the equations governing the kinetic energy of turbulence and the dissipation rate, couple...
[ 8 ] - Application of the Schwarz-Christoffel Transformation in Solving Two-Dimensional Turbulent Flows in Complex Geometries
In this paper, two-dimensional turbulent flows in different and complex geometries are simulated by using an accurate grid generation method. In order to analyze the fluid flow, numerical solution of the continuity and Navier-Stokes equations are solved using CFD techniques. Considering the complexity of the physical geometry, conformal mapping is used to generate an orthogonal grid by means of...
[ 9 ] - Thermal Behavior of a New Type of Multi-Layered Porous Air Heater
Based on an effective energy conversion method between gas enthalpy and thermal radiation, a multi-layered type of porous air heater has been proposed. In the five layered structure which is analyzed in this work, there are five porous layers which are separated by four quartz glass windows. The main layer operates as a porous radiant burner that products a large amount of thermal radiative ene...
Co-Authors