Numerical simulation of a three-layered radiant porous heat exchanger including lattice Boltzmann simulation of fluid flow
Authors
Abstract:
This paper deals with the hydrodynamic and thermal analysis of a new type of porous heat exchanger (PHE). This system operates based on energy conversion between gas enthalpy and thermal radiation. The proposed PHE has one high temperature (HT) and two heat recovery (HR1 and HR2) sections. In HT section, the enthalpy of flowing high temperature gas flow that is converted to thermal radiation emitted towards the two heat recovery sections in which the reverse energy conversion from thermal radiation to gas enthalpy takes place. In each section, a 2-D rectangular porous segment which is assumed to be absorbing, emitting and scattering is presented. For theoretical analysis of the PHE, the gas and solid are considered in non-local thermal equilibrium and separate energy equations are used for the two phases. Besides, in the gas flow simulation, the lattice Boltzmann method (LBM) is applied to obtain the velocity distribution through the porous segments. For the purpose of thermal analysis of the proposed PHE, volume-averaged velocities through the porous matrix obtained by LBM are used in the gas energy equation and then the coupled energy equations for gas and porous medium of each section are numerically solved using finite difference method. The radiative transfer equation is solved by discrete ordinates method to calculate the distribution of radiative heat flux in the porous medium. The numerical results consist of the gas and porous temperature distributions and also the variation of radiative heat flux are presented. Furthermore, the effects of scattering albedo, optical thickness and inlet gas temperature on the efficiency of the proposed PHE are investigated. It is revealed that this type of heat exchanger has high efficiency in comparison to conventional one. Also, the present numerical results for a porous radiant burner are compared with theoretical finding by the other investigator and good agreement is found.
similar resources
numerical simulation of fluid flow in random granular porous media using lattice boltzmann method
in this paper, fluid flow between two parallel flat plates that are partially filled with two-dimension porous media is investigated numerically using single relaxation time (srt) lattice boltzmann method (lbm) at pore scale. the considered obstacles are random, circular, rigid and granular with uniform diameters. single component and single-phase viscous newtonian fluid are considered as worki...
full textNumerical Simulation of Fluid Flow Past a Square Cylinder Using a Lattice Boltzmann Method
The method of lattice boltzmann equation(LBE) is a kinetic-based approach for fluid flow computations. In the last decade, minimal kinetic models, and primarily the LBE, have met with significant success in the simulation of complex hydrodynamic phenomena, ranging from slow flows in grossly irregular geometries to fully developed turbulence, to flow with dynamic phase transitions. In the presen...
full textEvaluation of two lattice Boltzmann methods for fluid flow simulation in a stirred tank
In the present study, commonly used weakly compressible lattice Boltzmann method and Guo incompressible lattice Boltzmann method have been used to simulate fluid flow in a stirred tank. For this purpose a 3D Parallel code has been developed in the framework of the lattice Boltzmann method. This program has been used for simulation of flow at different geometries such as 2D channel fluid flow an...
full textLattice-Boltzmann simulation of two-phase flow in porous media
[1] We simulate two-fluid-phase flow at the pore scale using a lattice Boltzmann (LB) approach. Using a parallel processing version of the Shan-Chen model that we developed, we simulate a set of ideal two-fluid systems and a model two-fluid-phase porous medium system comprised of a synthetic packing with a relatively uniform distribution of spheres. We use the set of ideal two-phase systems to ...
full textThree Dimensional Microscopic Flow Simulation Across the Interface of a Porous Wall and Clear Fluid by the Lattice Boltzmann Method
The effects of the porous medium on the flow in the interface region between a highly porous wall and clear fluid are discussed. Three dimensional laminar flows in the interface regions of foamed porous walls are microscopically simulated by the lattice Boltzmann method. The chosen porous structure is the body-centered-cubic or the unit cube structure whose porosity ranges 0.82-0.98. The veloci...
full textLattice Boltzmann Flow Simulation of Porous Medium-clear Fluid Interface Regions
The effects of a porous medium on the flow in the interface region between the porous wall and clear fluid are discussed. Laminar flows in the interface regions of foamed porous walls are microscopically simulated by the lattice Boltzmann method. The chosen porous structure is the body-centered-cubic or the unit cube structure whose porosity ranges . The velocity distribution in the interface r...
full textMy Resources
Journal title
volume 24 issue 3
pages 301- 319
publication date 2011-09-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023