Water Fast of Inkjet Print by Using Acrylic /Nano-Silver Ink
Authors
Abstract:
A colour ink jet printing with improved water fastness property was produced by using of special component in the ink’s formulation. In this study, the water fastness of ink jet prints which used acrylic/nano-silver resin nano-composite ink instead of conventional resin in ink’s formulation was examined. The nano composite resin was prepared via miniemulsion polymerization of acrylate monomers in the presence of silver nanoparticles. The water fastness properties of the prints were assessed by using the ASTM /F2292-03 water fastness test. The results indicated that acrylic/nano-silver resin increased impermeability of the printed paper and provided the water insoluble printed image on the paper. Also by adding acrylic/nano-silver resin, the hue of printed image was darker than conventional resin.
similar resources
Purification of inkjet ink from water using liquid phase, electric discharge polymerization and cellulosic membrane filtration.
A method to separate inkjet ink from water was developed using a liquid phase, electric discharge process. The liquid phase, electric discharge process with filtration or sedimentation was shown to remove 97% of inkjet ink from solutions containing between 0.1-0.8 g/L and was consistent over a range of treatment conditions. Additionally, particle size analysis of treated allyl alcohol and treat...
full textINKJET DEPOSITED SILVER NANOPARTICLE ELECTRODES
Silver nanoparticles are being given considerable attention because of their interesting properties and potential applications. One such exploitable use is as the major constituent of conductive inks and pastes used for printing various electronic components. This paper presents a novel direct-writing process for fabrication of the first deposited silver nanoparticles (AgNPs) (50-200nm) elec...
full textsynthesis of amido alkylnaphthols using nano-magnetic particles and surfactants
we used dbsa and nano-magnetic for the synthesis of amido alkylnaphtols.
15 صفحه اولScanning Parameter Selection for Inkjet Print Analysis
Noise in inkjet prints can be influenced by many factors, such as halftone pattern, dot size, dot color and ink coalescence. The measurement of various image noise characteristics, such as random graininess and banding, is often needed as part of system design and optimization. We consider the imaging requirements for a scanner used for inkjet printer evaluation. Methods to assess the influence...
full textModified Deinking of Digitally Printed Paper with Water Based Inkjet Ink
One of the most difficult recycling tasks is deinking of digitally printed paper with water based inkjet inks. The deinking of such paper is very important for the improvement of the digital printing industry. Generally, the manufacturers’ preferred method is INGEDE Method 11p, which defines the universal deinking process. Based on this method, two different deinking procedures were assessed. T...
full textMy Resources
Journal title
volume 4 issue 2
pages 79- 83
publication date 2011-08-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023