Voltammetric Determination of α-Lipoic Acid using Poly(Vanillin) Modified Platinum Electrode

Authors

  • Chedia Ben Ali Hassine Electrical and Electronics Engineering Department,Engineering Faculty, Özyegin University, İstanbul-Turkey
  • Muammer Burç Chemistry Department, Arts and Sciences Faculty, İnönü University, 44280, Malatya-Turkey
  • Öznur Güngör Chemistry Department, Arts and Sciences Faculty, İnönü University, 44280, Malatya-Turkey
  • Serap Titretir Duran Chemistry Department, Arts and Sciences Faculty, İnönü University, 44280, Malatya-Turkey
Abstract:

In the present study electrochemical detection of α-lipoic acid (α-LA) was carried out with a poly(Vanillin) modified platinum electrode p(VA)/PtE in Brinton Robinson buffer (BR) solution. The platinum electrode surface’s was modified with cyclic voltammetry method. The prepared Pt electrode was characterized by cyclic voltammetry in ferrocyanide and scanning electron microscopy (SEM) images. The number of cycles and scan rate effects were studied using square wave voltammetry (SWV) in BR buffer containing 1 mM α-LA. The electrochemical oxidation of α-lipoic acid on the modified Pt electrode is influenced by the pH and it is an irreversible reaction in which one electron and one proton are transferred. Electrolyte type and pH effect were studied. The anodic peak current shows a linear increase with α-LA concentrations ranging from 0.03 mM to 2.00 mM at pH 5, the detection limit being of 0.025 mM. The α-lipoic acid quantification in synthetic urine samples was made by SWV with the modified Pt electrode.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Voltammetric Determination of Curcumin in Spices using Platinum Electrode Electrochemically Modified with Poly(Vanillin-co-Caffeic Acid)

In this study a simple, highly sensitive, and selective electrochemical method was developed for determination of the low concentration curcumin (CUR) using a poly(vanillin-co-caffeic acid) p(Van-CA) modified platinum electrode. Electrode modification was carried out electrochemically with cyclic voltammetry (CV) method. For this purpose; a solution of 6 mM vanillin (Van) and 6 mM caff...

full text

Platinum Nanoparticle Electrode Modified Iodine using Cyclic Voltammetry and Chronoamperometry for Determination of Ascorbic Acid

This study investigated the oxidation of ascorbic acid (Vitamin C) using a platinum nanoparticle electrode coated with an iodine monolayer, called a modified electrode. The electrode were grown using the cyclic voltammetry technique and the electrochemical measurements were taken using the cyclic voltammetry and chronoamperometric technique. In the case of platinum nanoparticle electrode modifi...

full text

Simultaneous Voltammetric Determination of Ascorbic Acid and Uric Acid Using a Modified Multiwalled Carbon Nanotube Paste Electrode

This paper describes the development, electrochemical characterization and utilization of novel modified molybdenum (VI) complex-carbon nanotube paste electrode for the electrocatalytic determination of ascorbic acid (AA). The electrochemical profile of the proposed modified electrode was analyzed by cyclic voltammetry (CV) that showed a shift of the oxidation peak potential of AA about 235 mV ...

full text

Voltammetric Determination of Ferulic Acid Using Polypyrrole-Multiwalled Carbon Nanotubes Modified Electrode with Sample Application

A polypyrrole-multiwalled carbon nanotubes modified glassy carbon electrode-based sensor was devised for determination of ferulic acid (FA). The fabricated sensor was prepared electrochemically using cyclic voltammetry (CV) and characterized using CV and scanning electron microscope (SEM). The electrode shows an excellent electrochemical catalytic activity towards FA oxidation. Under optimal co...

full text

Characterization of Carbon Nanotubes-Gold Nanoparticles Composite Film Modified Electrode and Voltammetric Determination of Mefenamic Acid

Um novo eletrodo modificado com nanotubos de carbono foi fabricado, com base em nanotubos de carbono multi-paredes (MWCNTs) dispersos em colóide de nanopartículas de ouro (AuNPs). Foi observado que MWCNTs foram dispersos no colóide AuNPs homogeneamente. Fosfato ácido de dihexadecil (DHP) foi adicionado à suspensão para preparar um filme mais estável. O filme mostrou estrutura em rede e teve boa...

full text

Determination of Captopril using platinum coated nanoporous gold film electrode

In this article electrochemical determination of captopril at the surface of the platinum coated nanoporous gold film (PtNPGF) electrode is reported using the cyclic voltammetry and amperometry. For the preparation of PtNPGF, the surface of NPGF electrode was covered with Cu layer using underpotential electrochemical deposition (UPD).Afterward, the copper layer is replaced with platinum ions vi...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 12  issue 6

pages  857- 869

publication date 2020-06-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023