Using Rubber Pad Forming Process for Local Compression in Assembling of Vehicle Structure Tubes
Authors
Abstract:
Nowadays, tube bonding in vehicles structure is noticeably considered by many researches. In this paper, local tube compression process by a rubber ring has been studied. Firstly, simulation of the process was performed by FEM. Then, experimental test has been carried out to validate the numerical results. Numerical and experimental results were compared showing a good agreement. In the second part of this study, tube assembling of a two tubes was examined by a rubber ring. The simulation results have presented including stress distribution of both tubes. Finally, this method was compared with other tube assembling methods by observation of tube profile deformation.
similar resources
using rubber pad forming process for local compression in assembling of vehicle structure tubes
nowadays, tube bonding in vehicles structure is noticeably considered by many researches. in this paper, local tube compression process by a rubber ring has been studied. firstly, simulation of the process was performed by fem. then, experimental test has been carried out to validate the numerical results. numerical and experimental results were compared showing a good agreement. in the second ...
full textdevelopment and implementation of an optimized control strategy for induction machine in an electric vehicle
in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...
15 صفحه اولRubber tubes in the sea.
A long tube with elastic walls containing water is immersed in the sea aligned in the direction of wave travel. The waves generate bulges that propagate at a speed determined by the distensibility of the tube. If the bulge speed is close to the phase velocity of the waves, there is a resonant transfer of energy from the sea wave to the bulge. At the end of the tube, useful energy can be extract...
full textanalysis of ruin probability for insurance companies using markov chain
در این پایان نامه نشان داده ایم که چگونه می توان مدل ریسک بیمه ای اسپیرر اندرسون را به کمک زنجیره های مارکوف تعریف کرد. سپس به کمک روش های آنالیز ماتریسی احتمال برشکستگی ، میزان مازاد در هنگام برشکستگی و میزان کسری بودجه در زمان وقوع برشکستگی را محاسبه کرده ایم. هدف ما در این پایان نامه بسیار محاسباتی و کاربردی تر از روش های است که در گذشته برای محاسبه این احتمال ارائه شده است. در ابتدا ما نشا...
15 صفحه اولanalytical and numerical investigation of the deformation length in roll forming process of circular tubes
deformation length is one of the most important parameters in cold roll-forming process, which plays a fundamental role in determining the inter-distance between the stations and rate of deformation. deformation length was first introduced by bhattacharyya. he also obtained a closed-form relation for this length in roll-forming of symmetric channel section. in this paper, deformation length in ...
full textMy Resources
Journal title
volume 2 issue 2
pages 15- 22
publication date 2013-05-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023