TOPOLOGY OPTIMIZATION OF COMPOSITE MATERIALS WITH OPTIMAL STIFFNESS AND THERMAL CONDUCTIVITY
Authors
Abstract:
This paper presents the bidirectional evolutionary structural optimization (BESO) method for the design of two-phase composite materials with optimal properties of stiffness and thermal conductivity. The composite material is modelled by microstructures in a periodical base cell (PBC). The homogenization method is used to derive the effective bulk modulus and thermal conductivity. BESO procedures are presented to optimize the two individual properties and their various combinations. Three numerical examples are studied. The results agree well with those of the benchmark microstructures and the Hashin-Shtrikman (HS) bounds.
similar resources
Optimization of the Effective Thermal Conductivity of a Composite
Composite materials by definition are a combination of two or more materials. Although the idea of combining two or more components to produce materials with controlled properties has been known and used from time immemorial, modern composites were developed only several decades ago and have found by now intensive application in different fields of engineering (Vasiliev&Morozov, 2001). These ma...
full textDesign of smart composite materials using topology optimization
The topology optimization method is used to find the distribution of material phases that extremizes an objective function (e.g., thermal expansion coefficient, piezoelectric coefficients etc) subject to constraints, such as elastic symmetry and volume fractions of the constituent phases, within a periodic base cell. The effective properties of the material structures are found using a numerica...
full textThermal Conductivity of Thermally-Isolating Polymeric and Composite Structural Support Materials Between 0.3 and 4 K
We present measurements of the low-temperature thermal conductivity of a number of polymeric and composite materials from 0.3 to 4 K. The materials measured are Vespel SP-1, Vespel SP-22, unfilled PEEK, 30% carbon fiber-filled PEEK, 30% glass-filled PEEK, carbon fiber Graphlite composite rod, Torlon 4301, G-10/FR-4 fiberglass, pultruded fiberglass composite, Macor ceramic, and graphite rod. The...
full textEffective thermal conductivity in thermoelectric materials
Thermoelectric generators (TEGs) are solid state heat engines that generate electricity from a temperature gradient. Optimizing these devices for maximum power production can be difficult due to the many heat transport mechanisms occurring simultaneously within the TEG. In this paper, we develop a model for heat transport in thermoelectric materials in which an " effective thermal conductivity ...
full textComposite materials with viscoelastic stiffness greater than diamond.
We show that composite materials can exhibit a viscoelastic modulus (Young's modulus) that is far greater than that of either constituent. The modulus, but not the strength, of the composite was observed to be substantially greater than that of diamond. These composites contain bariumtitanate inclusions, which undergo a volume-change phase transformation if they are not constrained. In the comp...
full textExtreme damping in composite materials with a negative stiffness phase.
Composites with negative stiffness inclusions in a viscoelastic matrix are shown to have higher stiffness and mechanical damping tandelta than that of either constituent and exceeding conventional bounds. The causal mechanism is a greater deformation in and near the inclusions than the composite as a whole. Though a block of negative stiffness is unstable, negative stiffness inclusions in a com...
full textMy Resources
Journal title
volume 1 issue 3
pages 397- 417
publication date 2011-09
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023