Technologhy Transfer in Developing Countries Challenges and Dtrategies: Case study of Irans Auto Industry
Authors: not saved
Abstract:
The aim of this paper is two folds: 1- To compare the level of technological advances in Iran's Automotive Industry with that of its competitors globally. 2- To compare the relative technological advances of Iran’s Auto Industry with other sectors of the Iranian economy. To measure the level of technological advances, we have used the Atlas Model of Technology. The results indicate that the level of technological advances in Iran’s Auto Industry is quite low compared to developed countries; differences in the level of technology used in other sectors of the Iranian economy are not statistically significant. In conclusion, we proffer several recommendations and suggestions for improving the current level of technology in Iran’s Auto Industry.
similar resources
technologhy transfer in developing countries challenges and dtrategies: case study of irans auto industry
the aim of this paper is two folds: 1- to compare the level of technological advances in iran's automotive industry with that of its competitors globally. 2- to compare the relative technological advances of iran’s auto industry with other sectors of the iranian economy. to measure the level of technological advances, we have used the atlas model of technology. the results indicate that th...
full textE-waste Challenges in Developing Countries: South Africa Case Study
1. South Africa: Summary of faultlines and action points
full textepistemic modality in english and persian academic writing: a cross-linguistic study of genre on the notion of transfer
چکیده حیطه ی نوشتار دانشگاهی اخیرا شاهد تغییرات عمده ای از غیرشخصی بودن (عینی بودن) به شخصی بودن بوده است. شخصی بودن متون دانشگاهی اهمیت استفاده از وجهیت معرفتی را برجسته می سازد چرا که? وجهیت معرفتی? بر اساس یکی از تعاریف ارائه شده از این مقوله? ارتباط تنگاتنگی با شخصی بودن داشته و به عنوان بیان نظر شخصی گوینده در مورد جز گزاره ای گفته در نظر گرفته میشود. بنابراین? با در نظر داشتن نقاط مشترک...
15 صفحه اولAdvanced manufacturing technology transfer and implementation in developing countries: The case of the Cypriot manufacturing industry
This paper investigates the transfer and implementation process of advanced manufacturing technologies (AMTs) in developing countries using the Cypriot manufacturing industry as a case study. Specifically the paper addresses: (1) the management processes followed during the transfer of technology into the manufacturing environment, and (2) the steps followed both before and after implementation...
full textChallenges Facing the Construction Industry in Developing Countries
A successful construction industry is essential to us all. Benefits from efficiently constructed buildings and infrastructures are well known and we all benefit from them. If we are prepared to challenge the waste and poor performance arising from existing practices and focus efforts on delivering the value that our customers need we can attain and sustain continuos improvement in the industry....
full textapplication of brand personality scale in automobile industry: the study of samand’s brand personality dimensions
این تحقیق شخصیت برند سمند را در ایران با استفاده از مدل پنج بعدی آکر (1997) بعنوان یک چهارچوب بطور توصیفی سنجیده است. بنابر این چهارچوب که دراصل در 42 جزء (42 ویزگی شخصیتی) ودر پنج بعد شخصیتی طراحی شده بود ودر کشورها وصنایع مختلف آزموده شده بود, پرسنامه به زبان فارسی ترجمه شده و با استفاده از روشهای ترجمه معکوس و مصاحبه عمیق با 12 متخصص ایرانی به 38 جزء کاهش یافت. و نظرسنجی ای در پنج نمایندگی ا...
15 صفحه اولMy Resources
Journal title
volume 10 issue 14
pages 57- 78
publication date 2005-11-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023