Tailoring the Characteristics of Poly (phenylene-ether-ether) sulfone Membrane for Efficient Glycerol/Biodiesel Separation
Authors
Abstract:
Poly (phenylene-ether-ether) sulfone membrane was fabricated and characterized by efficient glycerol/biodiesel separation produced from waste cooking oils trans-esterification. The membrane preparation was processed by phase inversion technique. The morphology, Physico-chemical properties and separation behavior of membranes were studied at various PPEES concentration. A uniform surface was observed for the prepared membranes by scanning electron microscopy. AFM images exhibited that surface roughness was decreased from 9.24 to 7.26 nm by the increase of PPEES concentration from 12 to 15 %wt. Similar trend was found for the membrane Flux, water content, and porosity by the increase of PPEES content ratio up to 15 %wt. The efficiency of glycerol removal and mechanical strength was also improved by the increase of polymeric matrix concentration.
similar resources
Poly (Ether Ether Ketone) Based Anion Exchange Membrane for Solid Alkaline Fuel Cell: A Review
Solid alkaline fuel cell is employed by polymer anion exchange membrane (AEM) that is permeable to hydroxide ion. A number of polymers have been proposed for AEM which include polysulfone (PSF), poly (phenylene oxide) (PPO), and poly (ether ether ketone) (PEEK). The purpose of this paper was to conduct a critical review on the development of PEEK polymer as AEM, particu...
full textAdsorption Properties of Thiol-Functionalized Silica Nanoparticles Prepared for Application in Poly(ether sulfone) Nanocomposite Membranes
full text
Preparation and Physical Characterization of Sulfonated Poly (Ether Ether Ketone) and Polypyrrole Composite Membrane
Sulfoanted poly(ether ether ketone) membranes were prepared by the sulfonating agent sulfuric acid. These membranes were modifed by incorporating conducting polymer polypyrrole in order to increase the ionic conductivity and reduce the methanol transmission rate. The modifed composite membranes were then compared on the basis of ionic conductivity, methanol transmission...
full textPolybenzimidazole block sulfonated poly(arylene ether sulfone) ionomers.
Novel ionomers based on polybenzimidazole block sulfonated poly(arylene ether sulfone) show excellent thermal properties. The ionic aggregation of sulfonic acid groups leads to well-developed phase separated morphology and thus high proton conductivity at wide humidity range, up to 65 mS cm(-1) at 90% relative humidity.
full textSulfonated poly(ether sulfone)/sulfonated polybenzimidazole blend membrane for fuel cell applications
0014-3057/$ see front matter 2010 Published b doi:10.1016/j.eurpolymj.2010.03.005 * Corresponding author. Tel.: +82 2 958 5299; fax E-mail address: hjkim25@kist.re.kr (H.-J. Kim). Polymer blending is used to modify or improve the dimensional and thermal stability of any two different polymers or copolymers. In this study, both sulfonated polybenzimidazole homopolymer (MS-p-PBI 100) and sulfonat...
full textExcellent Biofouling Alleviation of Thermoexfoliated Vermiculite Blended Poly(ether sulfone) Ultrafiltration Membrane.
Flux and antifouling properties of mixed matrix membranes (MMMs) are yet to attain satisfactory status. The objective of this study is to find a method for mitigating the biofouling of poly(ether sulfone) (PES) ultrafiltration membranes via blending of thermoexfoliated vermiculite (VMT). Flow cytometry analysis shows that the behaviors of Bacillus subtilis 168 as a Gram-positive bacterium and E...
full textMy Resources
Journal title
volume 38 issue 1
pages 93- 99
publication date 2019-02-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023