Synthesis and electrochemical studies on Cu-TiO2 thin films deposited by spray pyrolysis technique for sensing Uric acid
Authors
Abstract:
In this study, we report an effective uric acid (UA) electrochemical biosensor using Cu-TiO2 electrode. UA is a biomedical compound that plays a vital role in human metabolism. The abnormal level of UA leads to several diseases. TiO2 and Cu-TiO2 with various concentrations were deposited on glass substrates by spray pyrolysis technique. The structural study shows by X-ray diffraction analysis shows that all the films are in anatase phase with tetragonal structure and confirm the incorporation of Cu ions into TiO2 lattice. The morphology and chemical composition of TiO2 and Cu-TiO2 were characterized by scanning electron microscopy (SEM) and energy-dispersive x-ray spectroscopy (EDS). These studies reveal that the aggregation of particles occurs due to doping and confirm the presence of Cu. The optical analysis was studied by UV-Vis absorption and photoluminescence spectroscopy, which indicates the band gap changes, shift in absorption peak and defects. Cyclic voltammetry (CV) was used to analyse the performance of the Cu-TiO2 as the electrochemical biosensor. Cu-TiO2 electrochemical biosensor exhibits good sensitivity, linearity and high stability for the detection of UA.
similar resources
Cadmium Oxide Thin Films Deposited by a Simplified Spray Pyrolysis Technique for Optoelectronic Applications
Cadmium oxide thin films were fabricated on glass substrates by a simplified and low cost spray pyrolysis technique at different substrate temperatures. The X-ray diffraction study showed that irrespective of substrate temperature all the films exhibits a preferential orientation along the (1 1 1) plane. The values of crystallite size were found to be in the range 20.72 – 29.6 nm. The perce...
full textcadmium oxide thin films deposited by a simplified spray pyrolysis technique for optoelectronic applications
full text
Preparation and growth of SnS thin film deposited by spray pyrolysis technique
In this paper thin films of tin sulfide (SnS) were deposited on the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. In this work the characteristic of SnS thin films investigated. The XRD pattern and optical transmittance of thin films also are discussed. With the change in concen...
full textStructural and Optical Properties of ZnS Thin Films Deposited by Spray Pyrolysis Technique
ABSTRACT The II-VI group semiconductors are of great importance due to their applications in various opto electronic devices. Among these semiconductor. Zinc sulphide is the most suitable for its utility in opto electronic devices. Zinc Sulphide has been prepared on glass substrate by using Spray Pyrolysis method. The optical properties of these films have been studied in the wavelength range 3...
full textStudies on Structural and Optical Characterization of In-Zn-S Ternary Thin Films Prepared by Spray Pyrolysis
Thin films of indium doped zinc sulfide (ZnS) for different indium (In) concentrations (x=0.0 - 0.8) were deposited onto glass substrate by spray pyrolysis method at 523K temperature. Aqueous solution of zinc acetate, indium chloride and thiorea were used to deposit the In-Zn-S film. The deposited thin films were characterized by Energy dispersive X-ray (EDX), Scanning electron microscopy (SEM)...
full textpreparation and growth of sns thin film deposited by spray pyrolysis technique
in this paper thin films of tin sulfide (sns) were deposited on the glass substrates using spray pyrolysis method with the substrate temperatures in the range of 400–600℃, keeping the other deposition parameters constant. in this work the characteristic of sns thin films investigated. the xrd pattern and optical transmittance of thin films also are discussed. with the change in concen...
full textMy Resources
Journal title
volume 10 issue 3
pages 230- 241
publication date 2019-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023