Studying a New Infrared Reflective Polymer Coating

Authors

  • A. Al-kawaz Material Engineering, Department of Polymer and Petrochemical Industries, University of Babylon, Babylon, Iraq
  • N. Hadi Material Engineering, Department of Polymer and Petrochemical Industries, University of Babylon, Babylon, Iraq
  • Z. Al-husainy Medical Physics Department, AL-Hila1 University, Babylon, Iraq
Abstract:

Although, that the solar energy is important for life continuity, there is need to protect large buildings from these radiations in summer and if the buildings are permitted to take these radiations, the cost of cooling will be too much. One of the most effective methods used to solve this problem is to coat buildings with specific pigments that reflect the solar infrared radiation. This work studies a new infrared reflective coating containing carotene pigment. UV-Vis spectroscopy results for the films with different concentrations of carotene pigment showed that the reflectance of IR spectrum reaches to 92% while the reflectance in the visible range (400-500 nm) was decreased to 42% by increasing the concentration. The FT-IR results showed the bonds of the Polymethylmethacrylate (PMMA) and pigment, noted that the transmittance increased for PMMA and pigment almost 10% as compared with pure PMMA. The  containing PMMA, indicating that the transmittance increased almost 10% for pigment-containing PMMA. The results confirmed that the prepared coatings could reflect UV-Vis spectrum. So, they can be used in the protecting the planet from this type of radiation.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Power generating reflective-type liquid crystal displays using a reflective polariser and a polymer solar cell

We herein report the results of a study of a power generating reflective-type liquid crystal display (LCD), composed of a 90° twisted nematic (TN) LC cell attached to the top of a light-absorbing polymer solar cell (PSC), i.e., a Solar-LCD. The PSC consisted of a polymer bulk-heterojunction photovoltaic (PV) layer of poly[[9-(1-octylnonyl)-9H-carbazole-2,7-diyl]-2,5-thiophenediyl-2,1,3-benzothi...

full text

Broadband infrared meanderline reflective quarter-wave plate.

We present a novel reflective quarter-wave plate comprised of subwavelength meanderline elements. The device is operational over the long-wave infrared (LWIR) spectrum, with significant spectral and angular bandwidths. Power reflection is approximately 70% over the majority of the LWIR. Efficient conversion from a 45° linear polarization state into circular polarization is demonstrated from fin...

full text

Improved atomic force microscopy cantilever performance by partial reflective coating

Optical beam deflection systems are widely used in cantilever based atomic force microscopy (AFM). Most commercial cantilevers have a reflective metal coating on the detector side to increase the reflectivity in order to achieve a high signal on the photodiode. Although the reflective coating is usually much thinner than the cantilever, it can still significantly contribute to the damping of th...

full text

Broadband Anti-Reflective Coating Based on Plasmonic Nanocomposite

We report on the fabrication, the characterization, and the optical simulation of a gold-silica nanocomposite and present its integration into a broadband anti-reflective coating (ARC) for a silicon substrate. The two-layer ARC consists of a nanocomposite (randomly distributed gold cluster in a silica matrix) and a pure silica film. We capitalize on the large refractive index of the composite t...

full text

Polymer solar cell by blade coating

Polymer bulk hetero-junction solar cells of poly(3-hexylthiophene) (P3HT) donor and (6,6)-phenyl-C61-butyric acid methyl ester (PCBM) acceptor are fabricated by blade coating in toluene solution. Desired donor–acceptor self-organization is achieved without the slow drying process and high boiling point solvent. Power conversion efficiency is 3.8%, much higher than the 2.6% obtained by spin coat...

full text

Spin coating of an evaporating polymer solution

Related Articles Spatial distribution of intra-molecular water and polymeric components in polyelectrolyte dendrimers revealed by small angle scattering investigations J. Chem. Phys. 135, 144903 (2011) Thermoreversible gelation of isotactic-rich poly(N-isopropylacrylamide) in water J. Chem. Phys. 135, 114903 (2011) Comparison of Brownian dynamics algorithms with hydrodynamic interaction J. Chem...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 12  issue 2

pages  93- 99

publication date 2019-04-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023