Study of the Notching HSS Rolls by CBN Tool using RSM Method

Authors

  • Amin Kolahdooz Assistant Professor, Young Researchers and Elite Club, Islamic Azad University, Khomeinishahr Branch, Isfahan/Khomeinishahr, Iran
  • Mohsen Jafari Dinani Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran.
  • Seyyed Ali Eftekhari Assistant Vice Chancellor for Research and Information technology Khomeini's Islamic Azad University City
Abstract:

One of the biggest problems of artisans , is notching the high speed steel roller is due to the inability to do this work, become high speed steel roller bearings are disposable. One of the biggest problems of artisans , is notching the high speed steel roller is due to the inability to do this work, become high speed steel roller bearings are disposable.When the roller is placed on the production line, because of the retained austenite make it very hard. High speed roller used in this study is barely above 70 Shc. Our goal is to obtain the optimum machining parameters that it requires a high number of tests that are practically impossible. So in order to achieve optimal machining parameters with the lowest test, RSM method in Minitab software was used. CBN tools performed well in all tests and succeeded with the best cutting speed 25 m/min, 0.05 mm feed and 0.05 mm depth of cut at the time of 1080 seconds, in notching one caliber.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

buckling of viscoelastic composite plates using the finite strip method

در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....

study of cohesive devices in the textbook of english for the students of apsychology by rastegarpour

this study investigates the cohesive devices used in the textbook of english for the students of psychology. the research questions and hypotheses in the present study are based on what frequency and distribution of grammatical and lexical cohesive devices are. then, to answer the questions all grammatical and lexical cohesive devices in reading comprehension passages from 6 units of 21units th...

a study on insurer solvency by panel data model: the case of iranian insurance market

the aim of this thesis is an approach for assessing insurer’s solvency for iranian insurance companies. we use of economic data with both time series and cross-sectional variation, thus by using the panel data model will survey the insurer solvency.

Optimization of cryogenic treatment parameters to maximise the tool wear of HSS tools by Taguchi method

This work describes the optimization of cryogenic treatment (CT) parameters such as the cooling rate, the soaking temperature, the soaking time, the tempering temperature and the tempering time to maximise the tool wear of high speed steel tools in dry turning of AISI 316 grade austenitic stainless steels by Taguchi method. For this purpose, four iteration of Taguchi design (L16) have been used...

full text

a study of the fifth child and ben in the world by doris lessing in the light of julia kristevas psychoanalytic concepts

این مطالعه به بررسی عوامل روانشناختی کریستوادردو رمان دوربس لسینگ،فرزندبنجم و بن دردنیای واقعی می بردازد.موفقیت یا شکست کاراکترهادر تکمیل شکست تتیزی یه کمک بدر وهم از مهم ترین دغدغه محقق می باشد.به بررسی تحلیل روانشناختی تمامی کاراکترها خصوصا بن برداخته و به دنبال نشانه هایی از جامعه شیشه ای کریستوا می باشد.

15 صفحه اول

Enhancement Wear Properties of HSS-M2 Tool Steel with WC Deposited by SMAW Process

In this study, the effect of cladded tungsten carbide layer upon HSS - M2 tool steel on microstructure, hardness, and wear behavior has been studied in two cases without using the middle layer and using the middle layer of nickel. Tungsten Carbide cladded on HSS - M2 tool steel by Arc Weld ( SMAW ). The ASTM-G65 wear test was used to determine its application for use in the mineral indus...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 9  issue 2

pages  259- 268

publication date 2016-07-22

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023