Study of nonlinear optical properties of Carbon nanotubes synthesized by Nickel and Nickel-Cobalt catalysts using Z-scan technique
Authors
Abstract:
The nonlinear optical properties of carbon nanotubes (CNTs) have been studied by using the Z-scan technique. Experiments are performed by CW second harmonic of Nd-YAG laser at 532 nm wavelength with a power of 40 mW. The samples are synthesized by the chemical vapor deposition (CVD) method in the presence of Nickel and Nickel-Cobalt catalysts. In this work, for the first time, effect of the type of catalyst has been investigated with CNTs being a set of series single-walled and multi-walled nanotubes with different diameters. Nonlinear refractive index (n2) and nonlinear absorption coefficient (β) were measured by a closed and open aperture experimental configuration of Z-scan.The experimental results show that the two-photon absorption effect is the dominant nonlinear process in the samples. The results approve the capability of the samples to be used as an optical limiter device. The nonlinear optical refractive index and nonlinear absorption coefficient of samples are in the order of 10-6 cm2/W and 10-1 cm/W, respectively. The sign of nonlinear refractive index of the samples is negative which indicates that the sample has acted as a divergent lens.
similar resources
control of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولinvestigation of the electronic properties of carbon and iii-v nanotubes
boron nitride semiconducting zigzag swcnt, $b_{cb}$$n_{cn}$$c_{1-cb-cn}$, as a potential candidate for making nanoelectronic devices was examined. in contrast to the previous dft calculations, wherein just one boron and nitrogen doping configuration have been considered, here for the average over all possible configurations, density of states (dos) was calculated in terms of boron and nitrogen ...
15 صفحه اولNonlinear Optical Investigation of Biochemical Analytes in Blood Serum via Z-Scan Technique
Background and Aims: Biomolecules' optical and nonlinear optical properties are widely used for different medical diagnoses and applications in biophotonic devices. These properties are essential in studying biological processes in living tissues. Aside from biomolecules' linear optical characteristics, their nonlinear optical characteristics have lately been considered. Materials and Methods:...
full textFemtosecond and nanosecond nonlinear optical properties of alkyl phthalocyanines studied using Z-scan technique
We report our results on nonlinear optical properties of 2(3), 9(10), 16(17), 23(24) tetra tert-butyl phthalocyanine and 2(3), 9(10), 16(17), 23(24) tetra tert-butyl Zinc phthalocyanine studied using Z-scan technique with 800 nm femtosecond and 532 nm nanosecond pulses. Nonlinear absorption behavior in both femtosecond and nanosecond domains was studied in detail. We observed three-photon absor...
full textNonlinear Optical Properties of Liquid Crystals Probed by Z-scan Technique
We present a review of experimental data on the nonlinear optical properties of thermotropic and lyotropic liquid crystals probed by the Z-scan technique. Depending on the time scale, different processes originate a nonlinear optical response. Particularly, at nanosecond range, the physical processes associated with the nonlinear response in thermotropics are not completely understood. In lyotr...
full textMechanical Properties of Electroformed Nickel Cobalt Alloys
Mechanical properties of nickel-cobalt alloys (0-10% Co) electroformed with low internal stress in sulfamate-based solutions were investigated in as deposited and heat treated conditions. It was demonstrated that alloy properties can be modified by selecting deposition conditions and alloy composition. Recommendations on alloy selection are made based on application requirements. The higher str...
full textMy Resources
Journal title
volume 2 issue 2
pages 177- 182
publication date 2019-05-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023