Study of Iridium (Ir) Thin Films Deposited on to SiO2 Substrates
Authors: not saved
Abstract:
Very smooth thin films of iridium have been deposited on super polished fused silica (SiO2) substrates using dc magnetron sputtering in argon plasma. The influence of deposition process parameters on film micro roughness has been investigated. In addition, film optical constants have been determined using variable angle spectroscopic ellipsometery, over the spectra range from vacuum ultraviolet to middle infrared (140 nm-35 ?m). Also the surface roughnesses were measured by atomic force microscopy (AFM).
similar resources
study of iridium (ir) thin films deposited on to sio2 substrates
very smooth thin films of iridium have been deposited on super polished fused silica (sio2) substrates using dc magnetron sputtering in argon plasma. the influence of deposition process parameters on film micro roughness has been investigated. in addition, film optical constants have been determined using variable angle spectroscopic ellipsometery, over the spectra range from vacuum ultraviolet...
full textA Study of ZnO Buffer Layer Effect on Physical Properties of ITO Thin Films Deposited on Different Substrates
The improvement of the physical properties of Indium Tin Oxide (ITO) layers is quite advantageous in photovoltaic applications. In this study the ITO film is deposited by RF sputtering onto p-type crystalline silicon (c-Si) with (100) orientation, multicrystalline silicon (mc-Si), and glass substrates coated with ZnO and annealed in vacuum furnace at 400°C. Electrical, optical, structural a...
full textSpectroscopic Ellipsometry Study of Co3O4 Thin Films Deposited on Several Metal Substrates
Spectroscopic ellipsometry and atomic force microscope techniques were employed to analyze optical properties, microstructure and thickness of cobalt oxide thin films deposited on metal substrates by the sol-gel dipping method. The ellipsometric data were conveniently fitted, assuming a stratified structure for the deposited film, which consists of a sublayer native oxide that was coated with a...
full texta study of zno buffer layer effect on physical properties of ito thin films deposited on different substrates
the improvement of the physical properties of indium tin oxide (ito) layers is quite advantageous in photovoltaic applications. in this study the ito film is deposited by rf sputtering onto p-type crystalline silicon (c-si) with (100) orientation, multicrystalline silicon (mc-si), and glass substrates coated with zno and annealed in vacuum furnace at 400°c. electrical, optical, structural and m...
full textEnhanced methanol sensing performance of oblique deposited WO3 thin films
Methanol (CH3OH) is a colorless liquid with a mild odor. The wide ranges of applications, toxicity and clinical implications of methanol have made necessary to develop reliable and high-performance methanol sensors. In this paper, WO3 thin films were deposited on SiO2/Si substrates by e-beam evaporation technique under normal and oblique angles and then post-annealed at 500 °C with a flow of ox...
full textElectromechanical Coupling Factor of Thickness - Shear Mode of the Piezoelectric Thin Films Deposited on Substrates
An experiment method for characterizing piezoelectric film, which is deposited on a substrate plate to form a thickness-shear wave High-overmode Bulk Acoustic Resonator (HBAR), will be presented in this paper. Based on the parallel and series resonant frequency spectra of the HBAR, the electromechanical coupling factor of the piezoelectric film operating in thickness-shear mode can be evaluated...
full textMy Resources
Journal title
volume 16 issue 2
pages -
publication date 2005-06-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023