STATCOM Optimal Allocation in Transmission Grids Considering Contingency Analysis in OPF Using BF-PSO Algorithm
Authors
Abstract:
In this paper, a combinational optimization algorithm is introduced to obtain the best size and location of Static Compensator (STATCOM) in power systems. Its main contribution is considering contingency analysis where lines outages may lead to infeasible solutions especially at peak loads and it commonly can be vanished by load-shedding. The objective of the proposed algorithm is firstly to prevent infeasible power flow solutions without undesired load-shedding, which is critical in contingency analysis; and secondly to mitigate overall power losses and costs. Moreover, active and reactive powers generation costs are considered in the proposed objective function. Since there are various constraints such as lines outages number, cost and their duration that must be taken to account, Bacterial Foraging oriented by Particle Swarm Optimization (BF-PSO) algorithm combined with Optimal Power Flow (OPF) is used to solve and overcome the complexity of this combinational nonlinear problem. In order to validate the accuracy of the proposed method, two test systems, including IEEE 30 bus standard system and Azarbaijan regional power system of Iran, are applied in simulation studies. All obtained optimization results show the effectiveness of the suggested combinational method in loss and cost reduction and preventing load-shedding.
similar resources
statcom optimal allocation in transmission grids considering contingency analysis in opf using bf-pso algorithm
in this paper, a combinational optimization algorithm is introduced to obtain the best size and location of static compensator (statcom) in power systems. its main contribution is considering contingency analysis where lines outages may lead to infeasible solutions especially at peak loads and it commonly can be vanished by load-shedding. the objective of the proposed algorithm is firstly to pr...
full textfault location in power distribution networks using matching algorithm
چکیده رساله/پایان نامه : تاکنون روشهای متعددی در ارتباط با مکان یابی خطا در شبکه انتقال ارائه شده است. استفاده مستقیم از این روشها در شبکه توزیع به دلایلی همچون وجود انشعابهای متعدد، غیر یکنواختی فیدرها (خطوط کابلی، خطوط هوایی، سطح مقطع متفاوت انشعاب ها و تنه اصلی فیدر)، نامتعادلی (عدم جابجا شدگی خطوط، بارهای تکفاز و سه فاز)، ثابت نبودن بار و اندازه گیری مقادیر ولتاژ و جریان فقط در ابتدای...
Transmission Reliability Cost Allocation Based on Contingency Filtering by Economic Indices in Large Power Systems
In this paper, the new approach for the transmission reliability cost allocation (TRCA) problem is proposed. In the conventional TRCA problem, for calculating the contribution of each user (generators & loads or contracts) in the reliability margin of each transmission line, the outage analysis is performed for all system contingencies. It is obvious that this analysis is very time-consuming fo...
full textFuzzy optimal placement of capacitors in the presence of nonlinear loads in unbalanced distribution networks using BF-PSO algorithm
This paper presents a new method to optimize locating and the size of fixed and switching capacitor banks based on Gravitational Search Algorithm (GSA). The algorithm is proposed for radial and meshed networks in the presence of unbalanced and nonlinear loads. The objective function considers the minimization of the total energy loss costs and capacitor installation cost, network total harmonic...
full textFuzzified Pso Algorithm for Dc-opf of Interconnected Power System
This paper present a new computationally efficient improved stochastic algorithm for solving multi-area DC Optimal Power Flow (DC-OPF) in interconnected power systems. This algorithm is based on the combined application of Fuzzy Logic strategy incorporated in Particle Swarm Optimization (PSO) algorithm, hence termed as Fuzzy PSO (FPSO). Multi-area DC-OPF calculations determine optimum generatio...
full textOptimal Design of Open Channel Sections Using PSO Algorithm
This paper applies an evolutionary algorithm, the particle swarm optimization (PSO), to design the optimum open channel section. Depth, channel side slope and bottom width are considered as the variables for rectangular, triangular and trapezoidal channels, respectively. The objective function is minimizing the construction cost of the channel section. MATLAB software is used for programming an...
full textMy Resources
Journal title
volume 1 issue 1
pages 1- 11
publication date 2007-06-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023