Springback Modeling in L-bending Process Using Continuum Damage Mechanics Concept
Authors
Abstract:
Springback is one of the most common and important issues in metal forming area. Due to the fact that springback depends on a variety of parameters, it is hard to predict. Hence, in this paper, the effect of continuum damage mechanics (CDM) on springback was investigated based on the Lemaitre isotropic unified damage law. Swift’s hardening law was employed to describe isotropic hardening behavior. The results indicated that considering the damage mechanics concept in springback modeling increases the predictability of springback.
similar resources
springback modeling in l-bending process using continuum damage mechanics concept
springback is one of the most common and important issues in metal forming area. due to it depends on variety of parameters, it is hard to predict. hence, in this paper, the effect of continuum damage mechanics (cdm) based on the lemaitre isotropic unified damage lawon springback was investigated. swift’s hardening law was employed to describe isotropic hardening behavior.the result showed cons...
full textProgressive Damage Analysis of Laminated Composites using Continuum Damage Mechanics
In this paper, progressive damage and global failure of composite laminates under quasi-static, monotonic loading are investigated using 3D continuum damage mechanics. For this purpose, a finite element program has been developed using an eight-node 2D layered element including layer-wise plate theory. Damage analysis of a single orthotropic layer under various uniform in-plane and transverse l...
full textCrack Propagation Calculations for Optical Fibers under Static Bending and Tensile Loads Using Continuum Damage Mechanics
Static fatigue behavior is the main failure mode of optical fibers applied in sensors. In this paper, a computational framework based on continuum damage mechanics (CDM) is presented to calculate the crack propagation process and failure time of optical fibers subjected to static bending and tensile loads. For this purpose, the static fatigue crack propagation in the glass core of the optical f...
full textStress Transfer Modeling in CNT Reinforced Composites using Continuum Mechanics (TECHNICAL NOTE)
Because of the substantial difference in stiffness between matrix and nanotube in CNT composite, the stress transfer between them controls their mechanical properties. This paper investigates the said issue, analytically and numerically, in axial load using representative volume element (RVE). The analytical model was established based on the modified Cox’s shear lag model with the use of some ...
full textNonlinear Bending Analysis of Sector Graphene Sheet Embedded in Elastic Matrix Based on Nonlocal Continuum Mechanics
The nonlinear bending behavior of sector graphene sheets is studied subjected to uniform transverse loads resting on a Winkler-Pasternak elastic foundation using the nonlocal elasticity theory. Considering the nonlocal differential constitutive relations of Eringen theory based on first order shear deformation theory and using the von-Karman strain field, the equilibrium partial differential eq...
full textSpringback Effect Prediction in Wipe Bending Process of Sheet Metal: a Ga-ann Approach
Sheet metal is one of the most important semi-finished products used in automobiles, domestic appliances, aircraft and other familiar products. Therefore sheet metal forming technology is an important engineering discipline in the area of mechanical engineering. In sheet metal forming, wipe bending process plays a major role in which the sheet metal tries to return to its original shape after r...
full textMy Resources
Journal title
volume 1 issue 3
pages 161- 167
publication date 2015-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023