Sorption of Thorium Using Magnetic Graphene Oxide Polypyrrole Composite Synthesized from Water Hyacinth Roots
author
Abstract:
Polypyrrole magnetic graphene oxide (PPy/MGO) composites have been synthesized from a natural source (water hyacinth roots) using polymerization technique for Th(IV) ions pre-concentration from aqueous solutions. The effects of controlling factor have been studied using the batch technique. The obtained results show that the maximum Th(IV) adsorption capacity by PPy/MGO composite is 277.8 mg/g at pH 4, which is higher than traditional adsorbents. PPy/MGO composite also presents excellent regeneration/reuse property. The PPy/MGO was thoroughly characterized by a number of techniques namely, Fourier transforms infrared, Raman, as well as X-ray diffraction, thermogravimetric and Energy-Dispersive X-ray (EDX). Due to the high adsorption capacity of Th (IV), PPy/MGO composite can be used in nuclear fuel achievement and for Th(IV) environmental pollution cleanup.
similar resources
Removal of Toxic Cr(VI) Ions from Water Sample a Novel Magnetic Graphene Oxide Nanocomposite
This work describes the synthesis of a novel magnetic graphene oxide composite for removal of Cr(VI) ions. The synthesized nanosorbent were characterized with various techniques such as FT-IR, X-ray diffraction (XRD), scanning electron microscopy (SEM), elemental analysis and vibrating sample magnetometry (VSM). This material is illustrated to represent a viable sorbent for the removal of Cr(VI...
full textElectrically and Electrochemically Active Composite Based on Polyester/Reduced Graphene Oxide/Polypyrrole with Remarkable Washing Durability
full text
REMOVAL OF ORGANIC DYES FROM CONTAMINATED WATER USING COFE2O4 /REDUCED GRAPHENE OXIDE NANOCOMPOSITE
Up to now, lots of materials such as active carbon, iron, manganese, zirconium, and metal oxides have been widely used for removal of dyes from contaminated water. Among these, ferrite nanoparticle is an interesting magnetic material due to its moderate saturation magnetization, excellent chemical stability and mechanical hardness. Graphene, a new class of 2D carbonaceous material with atom thi...
full textRemoval of Heavy Metals from Waste Water Using Water Hyacinth
-Water pollution has become one of the most serious problems of today’s civilization. In the last few years considerable amount of research has been done on the potential of aquatic macrophytes for pollutant removal or even as bio-indicators for heavy metals in aquatic ecosystems. Water hyacinth is one of the aquatic plant species successfully used for wastewater treatment. It is very efficient...
full textSeparation of thorium ions from wolframite and scandium concentrates using graphene oxide.
The separation of rare metals from the ores and commercially available compounds is an important issue due to the need of their high purity in advanced materials and devices. Important examples of two highly important elements that co-exist in the ores are scandium and thorium. Scandium containing ores and consequently also commercially available scandium compounds often contain traces of thori...
full textRemoving of Disinfection By-Product Precursors from Surface Water by Using Magnetic Graphene Oxide
The magnetic graphene oxide (MGO) was successfully synthesised by the in situ chemical co-precipitation method with Fe3+, Fe2+ and graphene oxide (GO) in laboratory and, was used as an adsorbent for disinfection by-product (DBP) precursors removing from four natural surface water samples. The results indicate that various DBPs formation significantly decreased by 7-19% to 78-98% for the four sa...
full textMy Resources
Journal title
volume 37 issue 3
pages 145- 160
publication date 2018-06-01
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023