Simulation of Wave Propagation over Coastal Structures Using WCSPH Method
Authors
Abstract:
In this paper a space-averaged Navier–Stokes approach was deployed to simulate the wave propagation over coastal structures. The developed model is based on the smoothed particle hydrodynamic (SPH) method which is a pure Lagrangian approach and can handle large deformations of the free surface with high accuracy. In this study, the large eddy simulation (LES) turbulent model was coupled with the weakly compressible version of the smoothed particle hydrodynamics (WCSPH) method to simulate the wave propagation over coastal structures. The WCSPH model was employed to simulate the periodic wave propagation over impermeable trapezoidal sea wall and submerged breakwater. The numerical model results were validated against the experimental and numerical data found in the literatures and some relatively good agreements were observed. Afterwards, solitary wave propagation over impermeable trapezoidal sea wall on a sloped bed was carried out and the results of numerical simulations were compared both qualitatively and quantitatively with experimental data of Hsiao and Lin (2010). The results of this study show that WCSPH method provides a useful tool to investigate the wave propagation over coastal structures.
similar resources
Seismic Wave-Field Propagation Modelling using the Euler Method
Wave-field extrapolation based on solving the wave equation is an important step in seismic modeling and needs a high level of accuracy. It has been implemented through a various numerical methods such as finite difference method as the most popular and conventional one. Moreover, the main drawbacks of the finite difference method are the low level of accuracy and the numerical dispersion for l...
full textSimulation of Wave Propagation
The application of multidimensional digital ltering theory to the simulation of continuous systems with distributed parameters has been treated in various recent contributions. Here, two diierent concepts will be compared, using a lossy transmission line of nite extent as an example. One approach is based on multidimensional wave digital lters, the other on the derivation of a simulating struct...
full textLamb wave propagation simulation in smart composite structures
Abaqus/Standard simulation of Lamb waves in smart composite plates is investigated for detecting delamination type damage. Composite plates typical of aerospace structures are used and a PZT actuator is surface bonded to excite Lamb waves. Abaqus model of composite plate uses layered solid elements. Piezoelectric (PZT-5H) actuator is modeled using piezoelectric elements that have both displacem...
full textNumerical Simulation of Wave Overtopping Over Composite Berm Breakwater
Breakwaters have changed a lot during their design history. Overtopping is an important parameter that its evaluation and reduction has always been noticed. In this study, the wave overtopping of composite berm breakwater as a new conceptual structure has been investigated numerical modeling was performed using FLOW-3D software. Then, based on a laboratory model conducted by Losada et al, cali...
full textA Study of the Wave Propagation Velocity in Granular Soils Using Discrete Element Method (DEM)
In the present paper, discrete element method (DEM) is used to study wave propagation phenomenon in granular soils. The effect of factors such as coefficient of friction, frequency, normal stiffness and soil gradation on the wave velocity is studied. Using the wall motion based on the sinusoidal function is the method of loading used in this simulation, through which the pressure wave is transf...
full textMy Resources
Journal title
volume 2 issue None
pages 1- 13
publication date 2014-09
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023