Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester
Authors
Abstract:
The most promising method for micro scale energy scavenging is via vibration energy harvesting which converts mechanical energy to electrical energy. Using piezoelectric cantilevers is the most common method for vibration energy harvesting. Changing the shape of the cantilevers can lead to changing the generated output voltage and power. In this work vibration energy harvesting via piezoelectric resonant unimorph cantilevers is studied and new design for obtaining more efficient piezoelectric energy harvester is suggested. This study provides comprehensive analysis of the output voltage relationships and deducing a considerable precise rule of thumb for calculating resonance frequency in cantilever-type unimorph piezoelectric energy harvesters using Rayleigh method. The analytical formula, is then analyzed and verified by FEM simulation in ABAQUS. The analytical data was found to be very close to simulation data. A key finding is that among all the unimorph trapezoidal V-shaped cantilever beams with uniform thickness, the triangular tapered cantilever, can lead to highest resonance frequency and by increasing the ratio of the trapezoidal bases, the resonance frequency decreases. These new findings provide guidelines on system parameters that can be manipulated for more efficient performance in different ambient source conditions.
similar resources
shape design optimization of unimorph piezoelectric cantilever energy harvester
the most promising method for micro scale energy scavenging is via vibration energy harvesting which converts mechanical energy to electrical energy by the effect of coupling between electric fields and mechanical variables. using piezoelectric cantilevers is the most common method for vibration energy harvesting. changing the shape of the cantilevers can lead to changing the generated output v...
full textCantilever Beam Based Piezoelectric Energy Harvester
AbstractWith the application of wireless sensor networks become widespread, supply energy for these wireless sensors proves to be a significant issue. Moreover, for the ambient vibration lies everywhere, the vibration can supply energy for the wireless sensor via energy harvester. The piezoelectric energy harvester becomes the research focus for the simple structure and higher energy conversion...
full textstudy of the resonant frequency of unimorph triangular v-shaped piezoelectric cantilever energy harvester
abstract: the main aim of the vibration energy harvesters is to locally power autonomous devices such as wireless sensors. generally, power levels are low and the environmental benefit of the technology is to replace batteries rather than saving energy per se. piezoelectric vibrational energy harvesters are usually inertial mass based devices, where a cantilever beam with a piezoelectric outer ...
full textDesign optimization and experimental analysis of Piezoelectric Energy harvester
This paper describes an approach to harvest electrical energy from a mechanically excited piezoelectric element. The structure of piezoelectric energy harvester is optimized for maximum power with minimum dimensions through Genetic Algorithm approach to enhance the conversion of mechanical energy into electrical energy using direct piezoelectric effect. Numerical analysis is carried out to obta...
full textResonant frequency of bimorph triangular V-shaped piezoelectric cantilever energy harvester
The concept of “energy harvesting” is to design smart systems to capture the ambient energy and to convert it to usable electrical power for supplying small electronics devices and sensors. The goal is to develop autonomous and self-powered devices that do not need any replacement of traditional electrochemical batteries. Now piezoelectric cantilever structures are being used to harvest vibrati...
full textAn Investigation into Resonant Frequency of Triangular V-Shaped Cantilever Piezoelectric Vibration Energy Harvester
Power supply is a bottle-neck problem of wireless micro-sensors, especially where the replacement of batteries is impossible or inconvenient. Now piezoelectric material is being used to harvest vibration energy for self-powered sensors. However, the geometry of a piezoelectric cantilever beam will greatly affect its vibration energy harvesting ability. This paper deduces a remarkably precise an...
full textMy Resources
Journal title
volume 47 issue 2
pages 247- 259
publication date 2016-12-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023