Selection of Suitable Geometry in Compact Heat Exchanger Design
author
Abstract:
This article doesn't have abstract
similar resources
Turbulence Model Comparison for Compact Plate Heat Exchanger Design Application
In the framework of the Gas-Power Conversion System for the Advanced Sodium Technological Reactor for Industrial Demonstration (ASTRID) project design, works done at CEA are focused on the design of the sodium-gas heat exchanger. Compact plate heat exchangers are indicated as the most suitable technology for such applications. An innovative compact heat exchanger geometry is proposed in this pa...
full textThe Influence of Brazing on Very Compact Heat Exchanger Surfaces
Three geometrically similar offset rectangular platefin surfaces with area densities in the range from goo to 2000 ft 2/ft3 were tested to establish the heat transfer., j-NR~ and flow friction, f-NR, characteristics. The Reynolds number range was from 60 to 3000. One surface was unbrazed while the other two, because of a two-to-one difference in plate, fin and offset spacing dimensions~ were ch...
full textReview Heat Exchanger: Research Development of Self-rotating Inserts in Heat Exchanger Tubes
Heat exchangers are widely used in power engineering and industrial applications, many techniques such as coiled tube, surface tension devices, rough surfaces, extended surfaces have been investigated to enhancethermal performance and to minimize the cost and size of the heat exchanger equipment. One of the most important techniques is tube insert. In general,tube inserts can be classified into...
full textMy Resources
Journal title
volume 18 issue 2
pages 61- 75
publication date 1999-07
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023