Selecting the best options of management of municipal solid waste using life cycle assessment methodology (case study: Noor city)

Authors

  • Karimi, Z Department of Environmental Health Engineering, School of Health, Mazandaran University of Medical Sciences, Sari, Iran
  • Rafiee, R Department of Environmental Sciences, Faculty of Natural Resources, University of Tehran, Karaj, Iran
  • Zazouli, MA Department of Environmental Health Engineering, School of Health, Mazandaran University of Medical Sciences, Sari, Iran AND Health Sciences Research Center, Mazandaran University of Medical Sciences, Sari, Iran
Abstract:

Background and Objective:  one of the major challenges in urban management in human societies is related to the collection, recycling and disposal of solid waste and sewage. Poor waste management causes pollution of water, soil and air. It will have a major impact on public health. The aim of present study was to investigate the current status and select the best options of management of municipal solid waste in Noor city (Mazandaran, Iran) using life cycle assessment (LCA) methodology. Materials and Methods: This research considered with five scenarios: 1) Recycling, composting and unsanitary landfilling; 2) Recycling, composting and sanitary landfilling; 3) Recycling, incineration and sanitary landfilling; 4) Recycling, composting and anaerobic digestion, incineration, sanitary landfilling; 5) Recycling and unsanitary landfilling. The required data for life cycle assessment inventory were collected through reviewing resources, preparing of questionnaires, completing the questionnaire by staff, and field inspections.The life cycle inventory was approved by the IWM model. Results: The scenario 5, which is the current situation in the region, had the highest environmental impact in terms of toxic emissions and ecological indicators among all the scenarios. Energy consumption in the scenarios 1 and 5 was higher than the unsanitary landfilling in comparison to the other scenarios. Accordingly, the scenarios 5 and 4 had the most and the least impact on methane gas production. Conclusion: According to the ecological index, the fourth scenario including recycling, composting and anaerobic digestion, and sanitary landfilling was the best scenario.  Fifth scenario with the highest pollution load was the worst scenario evaluated.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Life Cycle Assessment of Municipal Solid Waste Management in Tehran

Due to increasing solid waste generation and their significant impacts on human health, environmental assessment of the management and disposal methods become more and more important. There are various disposal methods which are the combinations that originate from a wide range of solid waste management systems. In this study, municipal waste of Tehran (which totals to 7507.5 tons/day) is asses...

full text

Life Cycle Assessment of the Management of Municipal Solid Waste: A Case Study

This study compares, from an environmental point of view, different alternative scenaria for the management of municipal solid waste generated in a city of 1.000.000 citizens. Three integrated solid waste management scenaria are developed. Each of these alternatives includes the recycling of part of the recyclable MSW at the source, the collection of MSW in bins, the gathering of MSW from bins,...

full text

Life Cycle Management of Municipal Solid Waste

Life-cycle assessment concepts and methods are currently being applied to evaluate integrated municipal solid waste management strategies throughout the world. The Research Triangle Institute and the U.S. Environmental Protection Agency are working to develop a computer-based decision support tool to evaluate integrated municipal solid waste management strategies in the United States. The waste...

full text

Using Life Cycle Assessment Method for Selecting Optimal Waste Management System in Tehran City

Introduction: In Tehran with a population of 9 million currently, about 2.5 million tons municipal solid waste have been producing annually. Materials and Models: In this study by using Life Cycle Assessment (LCA) model an optimal system of waste management of Tehran was recommended. Based on the quantity and quality of waste in Tehran in 2013 and facilities, three scenarios were selected. Fir...

full text

Using life cycle assessment for municipal solid waste management in Tehran Municipality Region 20

Background: Due to the lack of a proper waste management system, Tehran Municipality Region 20 is facing economic and environmental problems such as the high costs of a disposal system and source pollution. Life cycle assessment (LCA) is a method for collecting and evaluating the inputs, outputs, and potential environmental impacts of a product system throughout its life cycle. The current stud...

full text

Life Cycle Assessment in Municipal Solid Waste Management

Integrated Municipal Solid Waste (MSW) management is a tedious task requiring the simultaneous fulfilment of technical, economical and social constraints. It combines a range of collection and treatment methods to handle all materials in the waste stream in an environmentally effective, economically affordable and socially acceptable way (McDougall, 2001). Due to the complexity of the issues re...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 12  issue None

pages  607- 620

publication date 2020-02

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

No Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023