Second order sensitivity analysis for shape optimization of continuum structures
Authors
Abstract:
This study focuses on the optimization of the plane structure. Sequential quadratic programming (SQP) will be utilized, which is one of the most efficient methods for solving nonlinearly constrained optimization problems. A new formulation for the second order sensitivity analysis of the two-dimensional finite element will be developed. All the second order required derivatives will be calculated. These values will be used in SQP scheme for structural optimization. Both plane stress and plane strain problems are analyzed. Numerical examples show the success and effectiveness of the suggested formulation
similar resources
second order sensitivity analysis for shape optimization of continuum structures
this study focuses on the optimization of the plane structure. sequential quadratic programming (sqp) will be utilized, which is one of the most efficient methods for solving nonlinearly constrained optimization problems. a new formulation for the second order sensitivity analysis of the two-dimensional finite element will be developed. all the second order required derivatives will be calculat...
full textTOPOLOGICAL OPTIMIZATION OF VIBRATING CONTINUUM STRUCTURES FOR OPTIMAL NATURAL EIGENFREQUENCY
Keeping the eigenfrequencies of a structure away from the external excitation frequencies is one of the main goals in the design of vibrating structures in order to avoid risk of resonance. This paper is devoted to the topological design of freely vibrating continuum structures with the aim of maximizing the fundamental eigenfrequency. Since in the process of topology optimization some areas of...
full textApplication of Continuum Sensitivity Analysis and Optimization to Automobile Structures
Continuum element sensitivity analysis (CONTESA) and system optimization (SYSOPT) for Noise, Vibration, and Harshness (NVH) have been developed and applied to automobile structures for sizing, topology, and configuration design using Mindlin plate and Timoshenko beam theories. The topology optimization has been developed using the density approach, sequential linear programming, and the adjoint...
full textSensitivity Analysis of Optimization Problems Under Second Order Regular Constraints
We present a perturbation theory for nite dimensional optimization problems subject to abstract constraints satisfying a second order regularity condition. We derive Lipschitz and HH older expansions of approximate optimal solutions, under a directional constraint qualiication hypothesis and various second order suucient conditions that take into account the curvature of the set deening the con...
full textInvestigation of Utilizing a Secant Stiffness Matrix for 2D Nonlinear Shape Optimization and Sensitivity Analysis
In this article the general non-symmetric parametric form of the incremental secant stiffness matrix for nonlinear analysis of solids have been investigated to present a semi analytical sensitivity analysis approach for geometric nonlinear shape optimization. To approach this aim the analytical formulas of secant stiffness matrix are presented. The models were validated and used to perform inve...
full textContinuum shape sensitivity and reliability analyses of nonlinear cracked structures
A new method is proposed for shape sensitivity analysis of a crack in a homogeneous, isotropic, and nonlinearly elastic body subject to mode I loading conditions. The method involves the material derivative concept of continuum mechanics, domain integral representation of the J-integral, and direct differentiation. Unlike virtual crack extension techniques, no mesh perturbation is required in t...
full textMy Resources
Journal title
volume 2 issue 1
pages 43- 62
publication date 2011-04-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023