Resonant frequency of bimorph triangular V-shaped piezoelectric cantilever energy harvester

Authors

  • Mohsen Hamedi Professor, Faculty of Mechanical Engineering, University of Tehran, Tehran
  • Rouhollah Hosseini Young Researchers and Elite Club, South Tehran Branch, Islamic Azad University, Tehran, Iran
Abstract:

The concept of “energy harvesting” is to design smart systems to capture the ambient energy and to convert it to usable electrical power for supplying small electronics devices and sensors. The goal is to develop autonomous and self-powered devices that do not need any replacement of traditional electrochemical batteries. Now piezoelectric cantilever structures are being used to harvest vibration energy for self-powered devices. However, the geometry of a piezoelectric cantilever beam will greatly affect its vibration energy harvesting ability. This paper deduces a remarkably precise analytical formula for calculating the fundamental resonant frequency of bimorph V-shaped cantilevers using Rayleigh method. This analytical formula, which is convenient for mechanical energy harvester design based on Piezoelectric effect, is then validated by ABAQUS simulation. This formula raises a new perspective that, among all the bimorph V-shaped cantilevers and in comparison with rectangular one, the simplest tapered cantilever beam can lead to maximum resonant frequency and highest sensitivity. The derived formula can be commonly used as a relatively precise rule of thumb in such systems.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

An Investigation into Resonant Frequency of Triangular V-Shaped Cantilever Piezoelectric Vibration Energy Harvester

Power supply is a bottle-neck problem of wireless micro-sensors, especially where the replacement of batteries is impossible or inconvenient. Now piezoelectric material is being used to harvest vibration energy for self-powered sensors. However, the geometry of a piezoelectric cantilever beam will greatly affect its vibration energy harvesting ability. This paper deduces a remarkably precise an...

full text

study of the resonant frequency of unimorph triangular v-shaped piezoelectric cantilever energy harvester

abstract: the main aim of the vibration energy harvesters is to locally power autonomous devices such as wireless sensors. generally, power levels are low and the environmental benefit of the technology is to replace batteries rather than saving energy per se. piezoelectric vibrational energy harvesters are usually inertial mass based devices, where a cantilever beam with a piezoelectric outer ...

full text

Shape Design Optimization of Unimorph Piezoelectric Cantilever Energy Harvester

The most promising method for micro scale energy scavenging is via vibration energy harvesting which converts mechanical energy to electrical energy. Using piezoelectric cantilevers is the most common method for vibration energy harvesting. Changing the shape of the cantilevers can lead to changing the generated output voltage and power. In this work vibration energy harvesting via piezoelectri...

full text

Evaluation of Analytical and Finite Element Modeling on Piezoelectric Cantilever Bimorph Energy Harvester

Harvesting the electrical energy from their working environment has become a feasible choice of realizing self-powered systems or providing supplementary power sources to the battery. In this paper, a pre-loaded piezoelectric cantilever bimorph (PCB) energy harvester is adopted as the research object, for which a single degree-of-freedom analytical model and finite element modeling have been ca...

full text

Cantilever Beam Based Piezoelectric Energy Harvester

AbstractWith the application of wireless sensor networks become widespread, supply energy for these wireless sensors proves to be a significant issue. Moreover, for the ambient vibration lies everywhere, the vibration can supply energy for the wireless sensor via energy harvester. The piezoelectric energy harvester becomes the research focus for the simple structure and higher energy conversion...

full text

A low frequency piezoelectric power harvester using a spiral-shaped bimorph

We propose a spiral-shaped piezoelectric bimorph power harvester operating with coupled flexural and extensional vibration modes for applications to low frequency energy sources. A theoretical analysis is performed and the computational results show that the spiral structure has relatively low operating frequency compared to beam power harvesters of the same size. It is found that to optimize t...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 6  issue 1

pages  65- 73

publication date 2016-09-11

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023