Propose, Analysis and Simulation of an All Optical Full Adder Based on Plasmonic Waves using Metal-Insulator-Metal Waveguide Structure

Authors

  • Abbas Mokhtari Department of Electronic Engineering, Arak Branch, Islamic Azad University, Arak, Iran
  • Mohsen Olyaee Department of Electronic Engineering, Arak Branch, Islamic Azad University, Arak, Iran
Abstract:

This paper proposes a full adder with minimum power consumption and lowloss with a central frequency of 1550nm using plasmonic Metal-Insulator-Metal (MIM)waveguide structure and rectangular cavity resonator. This full adder operates based onXOR and AND logic gates. In this full adder, the resonant wave composition of the firstand second modes has been used and we have obtained a high transmission coefficientin the states in which the output must be active. This full adder uses the AND and XORlogic gates to be designed with three inputs, which results in the design of a full adderwith lower complexity, lower cost and fewer losses than Other full adders in whichAND and XOR logic gates are combined to be designed with two inputs. The relatedsimulations were performed by FDTD. The obtained results presented a performancesimilar to the predicted models, while considering approximations with theoreticalrelations.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Design and Simulation of a Metal-Insulator-Metal Filter Based on Plasmonic Split Ring

In this paper, a plasmonic filter made of a split ring, two U-shaped structures and two straight waveguides is designed and investigated. In the proposed structure, the split ring and U-shaped structures are situated between straight waveguides. Simulations are done based on FDTD method. Split ring, U-shaped structures and straight waveguides are made of air in the silver background. In the pro...

full text

A plasmonic modulator based on metal-insulator-metal waveguide with barium titanate core

We design a plasmonic modulator which can be utilized as a compact active device in photonic integrated circuits. The active material, barium titanate (BaTiO3), is sandwiched between metal plates and changes its refractive index under applied voltage. Some degree of switching of ferroelectric domains from the in-plane to out-of-plane orientation provides the change of the refractive index, whic...

full text

Detuned Plasmonic Bragg Grating Sensor Based on a Defect Metal-Insulator-Metal Waveguide

A nanoscale Bragg grating reflector based on the defect metal-insulator-metal (MIM) waveguide is developed and numerically simulated by using the finite element method (FEM). The MIM-based structure promises a highly tunable broad stop-band in transmission spectra. The narrow transmission window is shown to appear in the previous stop-band by changing the certain geometrical parameters. The cen...

full text

Fano Resonance Based on Metal-Insulator-Metal Waveguide-Coupled Double Rectangular Cavities for Plasmonic Nanosensors

A refractive index sensor based on metal-insulator-metal (MIM) waveguides coupled double rectangular cavities is proposed and investigated numerically using the finite element method (FEM). The transmission properties and refractive index sensitivity of various configurations of the sensor are systematically investigated. An asymmetric Fano resonance lineshape is observed in the transmission sp...

full text

1xN plasmonic power splitters based on metal-insulator-metal waveguides.

Novel plasmonic power splitters constructed from a rectangular ring resonator with direct-connected input and output waveguides are presented and numerically investigated. An analytical model and systematic approach for obtaining the appropriate design parameters are developed by designing an equivalent lumped circuit model for the transmission lines and applying it to plasmonic waveguides. Thi...

full text

Analysis of a Triangular-shaped Plasmonic Metal-Insulator-Metal Bragg Grating Waveguide

A novel triangular-shaped plasmonic metal-insulator-metal (MIM) Bragg grating waveguide is introduced, whose band-gap is narrower than that of the conventional step type and wider than that of the sawtoothshaped one. Moreover apodized triangular-shaped MIM Bragg grating structures are proposed in order to reduce the side lobes of the transmission spectrum, because the Bragg reflector with a saw...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 4  issue 3

pages  95- 116

publication date 2019-08-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023