Pressure Loss Estimation of Three-Phase Flow in Inclined Annuli for Underbalanced Drilling Condition using Artificial Intelligence

author

  • Reza Rooki Birjand University of Technology, Birjand, Iran.
Abstract:

Underbalanced drilling as multiphase flow is done in oil drilling operation in low pressure reservoir or highly depleted mature reservoir. Correct determination of the pressure loss of three phase fluids in drilling annulus is essential in determination of hydraulic horsepower requirements during drilling operations. In this paper the pressure loss of solid-gas-liquid three-phase fluids flow in inclined annulus was estimated using artificial neural network (ANN). Experimental data which are available in the literature were used for design of ANN. Pressure loss as output of ANN, was estimated from five effective parameters as inputs of ANN including gas and liquid superficial velocities, the inclination from horizontal, rate of penetration (ROP), pipe rotation speed (RPM). The correlation coefficient between predicted and experimental value for train and test data is 0.998 and 0.997 respectively.The root mean square error (RMS) and average absolute percent relative error (AAPE) for train data are 0.0082 and 2.77% and for test data, they are 0.0108 and 3.68 % respectively. The reliable results showed the high ability of artificial neural network for estimating pressure loss of three phase flow in annulus.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

pressure loss estimation of three-phase flow in inclined annuli for underbalanced drilling condition using artificial intelligence

underbalanced drilling as multiphase flow is done in oil drilling operation in low pressure reservoir or highly depleted mature reservoir. correct determination of the pressure loss of three phase fluids in drilling annulus is essential in determination of hydraulic horsepower requirements during drilling operations. in this paper the pressure loss of solid-gas-liquid three-phase fluids flow in...

full text

Supervisory control for underbalanced drilling operations

Good flow and pressure control is essential for successful Underbalanced Drilling (UBD) operations. This work evaluates the use of Model Predictive Control (MPC) for integrated control of well conditions and the topside separation system during UBD. The downhole well pressure, separator liquid levels, and the separator pressure are controlled by manipulation of the rig pump, the choke, and the ...

full text

A COMPARISON OF PERFORMANCE OF SEVERAL ARTIFICIAL INTELLIGENCE METHODS FOR ESTIMATION OF REQUIRED ROTATIONAL TORQUE TO OPERATE HORIZONTAL DIRECTIONAL DRILLING

Horizontal Directional Drilling (HDD) is extensively used in geothechnical engineering. In a variety of conditions it is essential to predict the torque required for performing the reaming operation. Nevertheless, there is presently not a convenient method to accomplish this task. To overcome this problem, in this research, the application of computational intelligence methods for data analysis...

full text

Two Phase Flow Pressure Drop Calculation Using Homogeneous Equilibrium Model

Although two-phase flow is frequently encountered in various location of the process plants, there is no a general accepted and verified two-phase flow model that may be used to size lines for such conditions. An obvious example is condensate water return lines. The API method that used in this study is based on the homogeneous equilibrium flow assumption, that is, equal velocity and equal temp...

full text

Feasibility of Supercritical Carbon Dioxide as a Drilling Fluid for Deep Underbalanced Drilling Operations

Feasibility of drilling with supercritical carbon dioxide to serve the needs of deep underbalanced drilling operations has been analyzed. A case study involving underbalanced drilling to access a depleted gas reservoir is used to illustrate the need for such a research. For this well, nitrogen was initially considered as the drilling fluid. Dry nitrogen, due to its low density, was unable to ge...

full text

Artificial Intelligence Based Three-Phase Unified Power Quality Conditioner

Power quality is an important measure of the performance of an electrical power system. This paper discusses the topology, control strategies using artificial intelligent based controllers and the performance of a unified power quality conditioner for power quality improvement. UPQC is an integration of shunt and series compensation to limit the harmonic contamination within 5 %, the limit impo...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 50  issue 2

pages  29- 35

publication date 2017-02-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023