Prediction of Surface in Machining by Flat and Spherical Surface Tools
Authors
Abstract:
In this paper, the profile of surfaces machined using end mills with flat and ball end tools in modeled. The real kinematics of the tool motion, the static deflection and the run out of the tool are included in the model. The cutting forces are calculated using a semi-empirical method based on orthogonal to oblique conversion of cutting coefficients. The thickness of the uncut chip is used as the critical parameter affected by the tool run out. Based on the above model, the final profile of the surface is generated and compared with existing experimental results
similar resources
the study of bright and surface discrete cavity solitons dynamics in saturable nonlinear media
امروزه سالیتون ها بعنوان امواج جایگزیده ای که تحت شرایط خاص بدون تغییر شکل در محیط منتشر می-شوند، زمینه مطالعات گسترده ای در حوزه اپتیک غیرخطی هستند. در این راستا توجه به پدیده پراش گسسته، که بعنوان عامل پهن شدگی باریکه نوری در آرایه ای از موجبرهای جفت شده، ظاهر می گردد، ضروری است، زیرا سالیتون های گسسته از خنثی شدن پراش گسسته در این سیستم ها بوسیله عوامل غیرخطی بوجود می آیند. گسستگی سیستم عامل...
Interaction forces between a spherical nanoparticle and a flat surface.
Due to the breakdown of Derjaguin approximation at the nanoscale level apart from the neglect of the atomic discrete structure, the underestimated number density of atoms, and surface effects, the continuum Hamaker model does not hold to describe interactions between a spherical nanoparticle and a flat surface. In this work, the interaction forces including van der Waals (vdW) attraction, Born ...
full textsurface roughness prediction via fuzzy-neural networks in dry machining
optimization of machining parameters is very important and the main goal in every machining process. surface finishing prediction is a pre-requirement to establish a center for automatic machining operations. in this research, a neuro-fuzzy approach is used in order to model and predict the surface roughness in dry turning. this approach has both the learning capability of neural network and li...
full textSurface Quality in Dry Machining of 55Cr3 Steel Bars
Lubricant and coolant can improve surface roughness in machining. In addition of ecological harms, thermal shock of coolant or lubricant may affect the surface integrity especially on surface residual stresses and micro-crack nucleation. Dry machining is ecologically desirable and it is considered as a necessity for manufacturing enterprises in the recent years. 55Cr3 steel grade is steel with ...
full textDesign, Manufacturing and Surface quality Analysis of Machining by Self-Rotary Milling Tool
One of the disadvantages of conventional milling tools is to produce a large amount of heat in cutting zone and so making the tool warmer. As a result, the tool would be worn and its life time would be reduced. Therefore, in long time machining, it is essential to change inserts and tools, continiously. A milling tool with self rotary cutting inserts was designed and manufactured that enables i...
full textRuled Surface Machining on Five-Axis CNC Machine Tools
To achieve high precision and high productivity in machining sculptured surfaces, a new architecture for a five-axis CNC interpolator for machining ruled surfaces was developed and demonstrated on a milling machine. The objective of the five-axis interpolator is to continuously maintain the milling cutter axis in parallel with the straight lines of the ruled surface. The cutter position and ori...
full textMy Resources
Journal title
volume 1 issue 1
pages 57- 66
publication date 2008-03-20
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023