Physicochemical Characterization and Antimicrobial Activity of Nanosilver Containing Hydrogels
Authors
Abstract:
Silver ion has been used for centuries to prevent and treat a variety of diseases and infections. In recent years, extensive studies have been undertaken on the use of antimicrobial properties of silver, incorporated within medical devices. The aim of this study was to prepare a formulation containing silver ion, which could be applied for wound dressing. The purity of nanosilver was measured by atomic absorption spectrophotometer. The purity was determined to be 96.80 % ±0.01. The "serial dilution method" was used to determine the Minimum Inhibitory Concentration (MIC) of nanosilver, on microorganisms such as staphylococcus aureus, and Pseudomonas aeruginosa. The MIC of nanosilver solution was 15.12 µg/ml. In order to design a hydrogel formulation, different formulations, using HPMC K15M, were made. Next, the best formulation (at 2% w/w) was selected, based on attractiveness, homogeneity and flexibility. This formulation was used for the preparation of the next formulations, containing various percentages of two types of plasticizer. Again, the best formulation was chosen. In order to increase the thickness and resistance of the film, another polymer (HPMC K100 or agar), was added to the formulation. For evaluation of the prepared films, different tests including determination of thickness and tensile strength, swelling and water vapor transition were performed. Finally, the best formulation containing 2% w/w HPMC K15M, 0.5% w/w HPMC K100 and 0.2% triacetin (as plasticizer)was selected. Then, various concentrations of nanosilver solution were added to the selected formulation. In this manner, the most suitable concentration of nanosilver (4 mg in an area of 100 cm2 or almost 1.5 g weight), which had the best antimicrobial effect in the hydrogel films was detected. In the final stage, the amount of silver in the final film was determined by atomic absorption spectrophotometer. The obtained result confirmed the amount of silver in the final film.
similar resources
antioxidant and antimicrobial activity of allium jesdianum extract
چکیده بررسی فعالیت ضد اکسیدانی و ضدمیکروبی عصاره گیاه بن سرخ (allium jesdianum) به کوشش: زهرا مقیمی هدف از این تحقیق بررسی میزان ترکیبات فنولی کل، ترکیبات فلاوونوئیدی کل، فعالیت ضداکسیدانی و ضدمیکروبی عصاره ی گیاه تازه و خشک بن سرخ بود. استخراج عصاره به روش های غوطه وری، استفاده از همزن مغناطیسی، دستگاه مایکروویو، امواج فراصوت و گرمادهی مقاومتی و با استفاده از متانول، اتانول و آب به عنوا...
synthesis and characterization of some new cyclometalated organoplatinum(ii) complexes containing phosphite ligand
در این تحقیق روشی جهت سنتز یک سری از کمپلکس های پلاتین (ii) حاوی لیگاند های دهنده ی فسفری شامل فسفیت و فسفین ارائه شده است. واکنش پیش ماده ی پلاتین (ii)،trans/cis- [ptcl2(sme2)2] ، با 2 اکی مولار از لیگاند p(oph)3در حلال بنزن کمپلکس1، cis-[ptcl2(p(oph)3)2] را تولید می نماید. جهت سنتز کمپلکس سایکلو متال فسفیتی، کمپلکس 1 با 1 اکی والان واکنشگر ptcl2 در حلال زایلن در شرایط رفلاکس زیر گاز آرگون م...
Physicochemical Determinants of Antimicrobial Activity
Antimicrobial peptides (AMPs) are lately receiving significant attention as targets for antibacterial drug research. While many machine learning techniques are shown effective for AMP recognition, their utility for the rational design of novel AMP-based drugs in the wet laboratory is questionable. In this paper we seek to elucidate determinants of antimicrobial activity in a well-studied class ...
full textComparison of Hydrogels Based on Commercial Chitosan and Beetosan® Containing Nanosilver.
Two series of hydrogels on the basis of commercial chitosan and chitosan derived from naturally expired honeybees are presented in this article. Sorption capacity and behavior of both kind of materials in simulated body fluids such as Ringer's liquid or artificial saliva have been determined and compared. Presence of functional groups in synthesized materials have been determined by means of FT...
full textSynthesis and characterization of Cadmium Oxide nanoparticles for antimicrobial activity
Cadmium Oxide (CdO) nanoparticles were prepared by precipitation method using Cadmium acetate and ammonia solution. Presence of chemical species, were verified by Fourier Transform Infra Red (FTIR) Spectrum. From X-Ray Diffraction (XRD) spectrum the particle size, d-spacing value and structure of the nanoparticle were analysed. Size of the nanoparticles and the elemental composition were detect...
full textMy Resources
Journal title
volume Volume 7 issue Number 1
pages 21- 28
publication date 2010-11-20
By following a journal you will be notified via email when a new issue of this journal is published.
Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023