Physical modeling of a refractive index photonic crystal fiber based on surface plasmon resonance
author
Abstract:
This article doesn't have abstract
similar resources
Fiber Optic Surface Plasmon Resonance based Refractive Index Sensor
In the present study, a surface plasmon resonance (SPR) based fiber optic sensor is proposed. The extreme sensitivity of SPR modes on the surrounding refractive index has been exploited to make the sensor. The optical fiber is coated with gold film which supports the propagation of surface plasmons. The SPR dip in the transmission spectrum is observed and its shift with varying refractive indic...
full textA surface-plasmon-resonance sensor based on photonic-crystal-fiber with large size microfluidic channels
A surface-plasmon-resonance (SPR) sensor based on photonic-crystal-fiber (PCF) with large size microfluidic channels is proposed. The size of the microfluidic channels with gold coating can be enlarged by reducing the number of the holes in the second layer, so the structure of the PCF is simple and easy to manufacture. It is propitious for metal coating and infiltration of microfluidic. The co...
full textSurface plasmon resonance biosensor based on gold-coated side-polished hexagonal structure photonic crystal fiber.
The refractive index sensing characteristics of the side-polished photonic crystal fiber (PCF) surface plasmon resonance (SPR) sensor are detailed investigated in this paper. We used the finite element method (FEM) to study the influences of the side-polished depth, air hole size, lattice constant, and the refractive index (RI) of the PCF material on sensing performance. The simulation results ...
full textSurface plasmon resonance sensor based on photonic crystal fiber filled with silver nanowires
Silver nanowire filled photonic crystal fibers are proposed in this paper to achieve surface plasmon resonance sensors and overcome the complicacy and difficulty of coating the holes in the photonic crystal fiber. Optical field distributions of these fibers at different wavelengths are calculated and simulated using the finite element method (FEM), and the sensing properties are discussed in bo...
full textA selectively coated photonic crystal fiber based surface plasmon resonance sensor
We propose a novel design for a photonic crystal fiber based surface plasmonic resonance sensor. The sensor consists of selectively metal-coated air holes containing analyte channels, which enhance the phase matching between the plasmonic mode and the core-guided mode. Good refractive index sensitivity as high as 5500 nm/RIU (refractive index unit) can be achieved in the proposed structure. Com...
full textPhotonic Crystal Fiber Mach-Zehnder Interferometer for Refractive Index Sensing
We report on a refractive index sensor using a photonic crystal fiber (PCF) interferometer which was realized by fusion splicing a short section of PCF (Blaze Photonics, LMA-10) between two standard single mode fibers. The fully collapsed air holes of the PCF at the spice regions allow the coupling of PCF core and cladding modes that makes a Mach-Zehnder interferometer. The transmission spectru...
full textMy Resources
Journal title
volume 19 issue 3
pages 27- 33
publication date 2023-03
By following a journal you will be notified via email when a new issue of this journal is published.
No Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023