Physical Modeling of a Hybrid Wind Turbine-solar Panel System Using Simscape Language (RESEARCH NOTE)

Authors

  • elhaini jamila Mechnical Engineering, faculty of sciences and technologie of Fez
Abstract:

Being sustainable and producing little waste products, the renewable energy knows a rapid deployment. Unfortunately, the intermittent characteristic of these energies makes them difficult to control. The influence of this aleatory character can be reduced with the coupling of two or more sources of renewable energy and secondly with a sound management of storage systems. This new configuration of production and energy management is the target of our research. The objective of this paper is to construct a model of a multi-sources system feeding a domestic house with the multi-physics approach which enables us to model, simulate and control all components and subsystems in our system consisting of wind turbine, solar panel and storage system with battery. This system feeds a domestic house. To achieve this objective, firstly, a system description is presented. Secondly, a SIMSCAPE model for the multisource system is developed in the MATLAB/SIMSCAPE software. Finally, results are derived from simulations.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Modeling Physical Systems as Physical Networks with the Simscape Language

Engineers are relying more and more on simulation to accelerate development processes. Combining computer simulation with Model-Based Design techniques enables engineers to not only complete tasks in a shorter period of time, it makes it possible to find design errors before building hardware, making the errors easier and less expensive to fix.[1] As the systems they develop require integrating...

full text

Cooling Enhancement of a Photovoltaic Panel Through Ferrofluid Stimulation Using a Magnetic-Wind Turbine

Wind energy is used to rotate a magnetic turbine in order to remove heat from the surface of a photovoltaic (PV) panel. A three-bladed turbine, which rotates with wind energy, has rotational motion underneath the studied PV panel in order to move Magnetic Nano-Particles (MNPs). In addition, effects of the magnetic field strength (B=450-830 mT), rotational velocity of the magnetic turbine (ω), a...

full text

Multi-Physical Domain Modeling of a DFIG Wind Turbine System using PLECS®

A cost and energy efficient method of wind power generation is to connect the output of the turbine to a doubly-fed induction generator (DFIG), allowing operation at a range of variable speeds. While for electrical engineers the electromagnetic components in such a system, like the electric machine, power electronic converter and magnetic filters are of most interest, a DFIG wind turbine is a c...

full text

Modeling a DFIG Wind Turbine System using PLECS

Variable speed operation is essential for large wind turbines in order to optimize the energy capture under variable wind speed conditions. Variable speed wind turbines require a power electronic interface converter to permit connection with the grid. The power electronics can be either partially-rated or fully-rated [1]. A popular interface method for large wind turbines that is based on a par...

full text

A Wind Turbine Benchmark for Hybrid System Analysis & Design

Recent years have witnessed an enormous growth of interest in dynamic systems that are characterised by a mixture of both continuous and discrete dynamics, commonly referred to as hybrid or switching systems. Nevertheless, there is a notable lack of suitable benchmark problems on which to assess and compare competing analysis and design methods. The present paper provides a collection of detail...

full text

Wind Turbine Power Curve Modeling Using Parametric Approach

Abstract: In recent years, due to the limitation of fossil fuels and the environmental Impact of using these fuels, focusing on renewable energy sources has increased significantly. In developed countries, using clean energy such as wind power has been considered as an alternative source. Monitoring the performance of wind turbines and controlling their output power quality is one of the import...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 27  issue 11

pages  1767- 1776

publication date 2014-11-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023