Parameters of ZnS/Metal/ZnS nanostructured systems with different metal layers
Authors
Abstract:
ZnS/metal/ZnS (ZMZ) nanomultilayer films with Au, Ag and Cu as a metal layer have been deposited on a glass substrate by thermal evaporation and then, were annealed in air at different temperatures from 100 to 300 ºC for one hour. Several analytical tools such as X-ray diffraction, four point probe and spectrophotometer were used to study the changes in structural, electrical and optical properties of the samples. XRD patterns show that the crystallinity of structures and also grain size of particles increases with increasing the annealing temperature. Improved electrical property (a sheet resistance of 7 Ω/sq for ZnS/Au/ZnS) and considerable improvement in the transmittance curves (86% maximum transmittance for ZnS/Au/ZnS) of the samples after heat treatment at 200ºC was observed. Also, the optical constants of the ZMZ multilayer samples were calculated from transmittance and reflectance measurements. The figure of merit was applied on the ZMZ coatings and the most suitable films and annealing temperature for the application as transparent conductive electrodes were determined.
similar resources
Metal Surface Modification for Obtaining Nano- and Sub-Nanostructured Protective Layers
Regularities of the phase protective layer formation in multicomponent systems involving inhibitors with different mechanism of protective action have been investigated. It was shown that optimization of the composition of the inhibition mixture allows to obtain higher protective efficiency owing to improved microstructure of the phase layer. It was found that mechanism of the film formation in...
full textThe first bulk nanostructured metal
Nanotechnology has become an overused adjective, but there has been justified excitement in the context of structural materials. A class of iron alloys has been discovered in which a high density of strong interfaces can be created by heat-treatment alone. The packing of interfaces is so large, and the fact that there is an intrinsic work hardening mechanism in the structure, leads to remarkabl...
full textAdvanced Atom Chips with Two Metal Layers
A design concept, device layout, and monolithic microfabrication processing sequence have been developed for a dual-metal layer atom chip for next-generation positional control of ultracold ensembles of trapped atoms. Atom chips are intriguing systems for precision metrology and quantum information that use ultracold atoms on microfabricated chips. Using magnetic fields generated by current car...
full textFabrication of nanostructured metal nitrides with tailored composition and morphology.
Unprecedented multi-channel TiN micro/nanotubes as well as various metal nitride nanofibers, including TiN, VN, NbN and ternary metal nitride nanofibers, were fabricated by a template free electrospinning method combined with post-nitridation.
full textOptical properties of nanostructured metal films.
Nanostructured metal films of platinum, gold and silver up to 675 nm thick we prepared by electrochemical deposition through templates of 700 nm diameter polystyrene spheres assembled as hexagonal close packed monolayer on an evaporated gold surface followed by removal of the template by dissolution in tetrahydrofuran. The reflection spectra of the films at normal incidence were recorded as a f...
full textsynthesis and dna interaction studies of new cobalt (ii) complexes containing different dinitrogen aaromatic ligands with calf thymus dna using different spectroscopy methods
در این مطالعه بر هم کنش این چهار کمپلکس با dna تیموس گوساله توسط روش های اسپکتروفتومتری، فلوریمتری، دو رنگ نمائی دورانی، و ویسکوزیمتری بررسی شدند تا اثر استخلاف های متیل بر روی لیگاندهای فنانترولین بررسی گردد.
My Resources
Journal title
volume 4 issue None
pages 105- 112
publication date 2010-06
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023