Optimization of Dimensional Deviations in Wax Patterns for Investment Casting
Authors
Abstract:
Investment casting is a versatile manufacturing process to produce high quality parts with high dimensional accuracy. The process begins with the manufacture of wax patterns. The dimensional accuracy of the model affects the quality of the finished part. The present study investigated the control and optimization of dimensional deviations in wax patterns. A mold for an H-shaped wax pattern was designed and fabricated and the two most important dimensional deviations (sink marks and warpage), are investigated. Four process parameters (injection temperature, injection pressure, hold time, cooling time) affecting dimensional deviations of the wax pattern were measured. Using a 2k factorial DOE technique, 32 experiments were designed to investigate the effect of these parameters on the two main defects in wax patterns. The results show the effect of the parameters on warpage and sink marks (output variables). The relationships between these inputs and the output variables were identified using an artificial neural network. The optimal level of each factor to minimize warpage and sink marks was determined using a multi-objective genetic algorithm. The results of this research can help decrease the time and cost of the process, dimensional deviations, and waste.
similar resources
optimization of dimensional deviations in wax patterns for investment casting
investment casting is a versatile manufacturing process to produce high quality parts with high dimensional accuracy. the process begins with the manufacture of wax patterns. the dimensional accuracy of the model affects the quality of the finished part. the present study investigated the control and optimization of dimensional deviations in wax patterns. a mold for an h-shaped wax pattern was ...
full textThe effect of injection parameters on dimensional accuracy of wax patterns for investment casting
Thermal expansion and hot deformation are two phenomena causing dimensional errors in investment casting. This error occurs in dimensions between the die and wax pattern. Therefore, the wax's thermo-physical and thermo-mechanical properties, the metal die features, and the process parameters affect the dimensions of the wax pattern. Some important effective process parameters are the injection ...
full textShrinkage Analysis of Wax Patterns For Aerospace Components in Investment Casting Process
Investment casting has been the most widely used process for several centuries for producing components of excellent surface finish, dimensional accuracy and complex shapes. In the present study, work has been done to select a correct wax type with minimum shrinkage for further investment casting process of aerospace components. Wax Patterns were made with different types of waxes namely Patter...
full textOptimization of the Investment Casting Process
Rapid prototyping is an important technique for manufacturing. This work refers to the manufacture of hollow patterns made of polymeric materials by rapid prototyping technologies for its use in the preparation of ceramic molds in the investment casting process. This work is focused on the development of a process for manufacturing patterns diff erent from those that currently exist due to its ...
full textanalyzing patterns of classroom interaction in efl classrooms in iran
با به کار گیری روش گفتما ن شنا سی در تحقیق حا ضر گفتا ر میا ن آموزگا را ن و زبا ن آموزا ن در کلا سهای زبا ن انگلیسی در ایرا ن مورد بررسی قرار گرفت. ا هداف تحقیق عبا رت بودند از: الف) شنا سا ئی سا ختارهای ارتبا ط گفتا ری میا ن معلمین و زبا ن آموزا ن ب) بررسی تا ثیر نقش جنسیت دبیرا ن و زبا ن آموزان بر سا ختا رهای ارتبا ط گفتا ری میا ن آنها پ) مشخص کردن اینکه آ یا آموزگاران غا لب بر این ارتبا ط گف...
Investment Casting with Ice Patterns Made by Rapid Freeze Proto
One of the most promising applications of rapid freeze prototyping (RFP) is making metal parts by investment casting with the built ice parts. The integration of RFP and investment casting allows fast creation of complex net-shape metal parts directly from their CAD models. The advantages of doing so include no part geometric complexity limitation, no experience of parting line design and assem...
full textMy Resources
Journal title
volume 45 issue 1
pages 23- 28
publication date 2014-09-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023