Optimal Placement and Sizing of TCSC & SVC for Improvement Power System Operation using Crow Search Algorithm

author

  • Noorinezhad, Noorallah
Abstract:

Abstract: The need for more efficient power systems has prompted the use of a new technologies includes Flexible AC transmission system (FACTS) devices. FACTS devices provides new opportunity for controlling the line power flow and minimizing losses while maintaining the bus voltages within a permissible limit. In this thesis a new method is proposed for optimal placement and sizing of Thyristor controlled series compensator (TCSC) and Static VAR compensator (SVC) for improvement power system operation using crow search algorithm. Optimal place for installation of TCSC and SVC is determined based on line’s reactive power flow and voltage collapse proximity indication (VCPI), respectively. Optimal size of FACTS devices as long as reactive power of generating units and optimal tap of transformers is computed by solving an optimization problem. The objective function is defined as minimizing the sum of the network costs includes costs of energy losses and costs of FACTS devices. Crow search algorithm is a novel metaheuristic optimization method that inspired from the intelligent behavior of crows in storing and retrieving foods. That’s this thesis is used for the first time in optimal placement and sizing of TCSC and SVC. The proposed method is simulated on IEEE 30 bus and 57 bus sample networks in MATLAB environment. Simulation results shows that crow search algorithm converges to optimal solution while meets all technical constraints.And Improves the power system efficiency.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Optimal Placement and Sizing of SVC in Power System for Voltage Stability Improvement using Harmony Search Algorithm

Voltage Instability is one of the major phenomena which has resulted a major obstruct to power system network. Use FACTS controllers possible that voltage stability status in a stressed power system could be improved with effective reactive power compensation. This paper proposes at multi-objective optimization problem such as minimization of real power loss, L-index and load voltage deviation....

full text

Optimal Placement and Sizing of SVC for Load Margin Improvement Using BF Algorithm

Power systems are operating under stressed condition due to continuous increase in demand of load. This can lead to voltage instability problem when face additional load increase or contingency. In order to avoid voltage instability suitable size of reactive power compensation at optimal location in the system is required which improves the load margin. This work aims at obtaining optimal size ...

full text

Optimal Placement of SVC for Losses Reduction and Voltage Profile Improvement in Electrical Power System Using Improved Gravitational Search Algorithm

The development of the more increasing power electronics allows the use of FACTS devices to manage and improve either the flow of power or the stability of the power system. One type of FACTS device studied is the SVC. In this study, optimization of SVC is used to determine the most appropriate location and rating in order to obtain the optimum power transfer. Optimization methods used in this ...

full text

Optimal Operation of CHP Combined Heat Generation Systems Using the Crow Search Optimization Algorithm

Energy efficiency of power plants is less than 60% However, the efficiency of the CHP units can be up to 90 %.CHP units in addition to high efficiency, They reduce environmental pollutants by 13 to 18 percent. The purpose of this thesis is to use the simultaneous power and power generation plants to reach the optimal economic destination for Genco And to maximize economic profit And to minimize...

full text

A graph search algorithm: Optimal placement of passive harmonic filters in a power system

The harmonic in distribution systems becomes an important problem due to an increase in nonlinear loads. This paper presents a new approach based on a graph algorithm for optimum placement of passive harmonic filters in a multi-bus system, which suffers from harmonic current sources. The objective of this paper is to minimize the network loss, the cost of the filter and the total harmonic disto...

full text

Simultaneous RPD and SVC Placement in Power Systems for Voltage Stability Improvement Using a Fuzzy Weighted Seeker Optimization Algorithm

Voltage stability issues are growing challenges in many modern power systems. This paper proposes optimizing the size and location of Static VAR Compensator (SVC) devices using a Fuzzy Weighted Seeker Optimization Algorithm (FWSOA), as an effective solution to overcome such issues. Although the primary purpose of SVC is bus voltage regulation, it can also be useful for voltage stability enhance...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 8  issue 1

pages  61- 75

publication date 2019-05

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

No Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023