OPTIMAL NOZZLE SHAPES OF CO2-N2-H2O GASDYNAMIC LASERS

Authors: not saved
Abstract:

In an axisymmetric CO2-N2-H2O gas dynamic laser, let ? denote the intersection of the vertical plane of symmetry with the upper part of the (supersonic) nozzle. To obtain a maximal small signal gain, some authors have tested several families of curves for ?. To find the most general solution for ?, an application of Pontryagin’s principle led to the conjuncture that the optimal ? must consist of two straight lines of slopes m and 0 smoothly joined by a parabolic arc. (The parabolic section will vanish if nonsmooth ? is allowed.) The conjecture was settled in the affirmative for special cases. The present work extends these results in the following directions. (i) For the nonsmooth case, Pontryagin’s principle produces no singularity and ? consists of k straight lines of certain slopes m and 0. (ii) A “semi-uncoupled” approximation is used to show, in (i), that k = 2. (“coupled” stands for the dynamic coupling between vibrational temperatures and translational temperature.) (iii) An uncoupled approximation is used in the smooth case to show that the general ? consists of a line segment of slope m, a parabolic arc and a horizontal line. (iv) The small signal gain increases whenever the slope m and/or the curvature of the parabolic section increase. However, the latter two quantities must be bounded to reduce gas detachment from the walls or oblique shock waves in the active media. (v) Finally, the optimal shapes and gains are numerically calculated for several values of the stagnation pressure and molar fractions of the gas mixture.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

optimal nozzle shapes of co2-n2-h2o gasdynamic lasers

in an axisymmetric co2-n2-h2o gas dynamic laser, let ? denote the intersection of the vertical plane of symmetry with the upper part of the (supersonic) nozzle. to obtain a maximal small signal gain, some authors have tested several families of curves for ?. to find the most general solution for ?, an application of pontryagin’s principle led to the conjuncture that the optimal ? must consist o...

full text

ON OPTIMAL NOZZLE SHAPES OF GAS-DYNAMIC LASERS

Pontryagin's principle is used to study the shape of the supersonic part of the nozzle of a carbon dioxide gas-dynamic laser whose gain is maximal. The exact shape is obtained for the uncoupled approximation of Anderson's bimodal model. In this case, if sharp corners are allowed, the ceiling of the supersonic part consists of a slant rectangular sheet followed by a horizontal one; otherwise...

full text

on optimal nozzle shapes of gas-dynamic lasers

pontryagin's principle is used to study the shape of the supersonic part of the nozzle of a carbon dioxide gas-dynamic laser whose gain is maximal. the exact shape is obtained for the uncoupled approximation of anderson's bimodal model. in this case, if sharp corners are allowed, the ceiling of the supersonic part consists of a slant rectangular sheet followed by a horizontal one; oth...

full text

Combustion Characteristics of Single Particles from Bituminous Coal and Pine Sawdust in O2/N2, O2/CO2, and O2/H2O Atmospheres

Burning fuels in an O2/H2O atmosphere is regarded as the next generation of oxy-fuel combustion for CO2 capture and storage (CCS). By combining oxy-fuel combustion and biomass utilization technology, CO2 emissions could be further reduced. Therefore, this work focuses on investigating the combustion characteristics of single particles from bituminous coal (BC) and pine sawdust (PS) in O2/N2, O2...

full text

Pebax-Modified Cellulose Acetate Membrane for CO2/N2 Separation

Carbon dioxide (CO2) release from the exhaust gas streams of power plants that burn fossil fuels contributes the most emission of this gas, which includes more than half of the greenhouse effects. Thus, the separation of CO2 from exhaust gases is one of the main environmental concerns. Membrane technology, due to many advantages, has attracted many research attentions among the various gas sepa...

full text

Optimal filling of shapes.

We present filling as a type of spatial subdivision problem similar to covering and packing. Filling addresses the optimal placement of overlapping objects lying entirely inside an arbitrary shape so as to cover the most interior volume. In n-dimensional space, if the objects are polydisperse n-balls, we show that solutions correspond to sets of maximal n-balls. For polygons, we provide a heuri...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 12  issue 1

pages  -

publication date 2001-03-01

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023