Optimal Integral Sliding Mode Controller of a UAV With Considering Actuator Fault

Authors

  • A. F. Ehyaei Department of Electrical Engineering, Imam Khomeini International University, Qazvin, Iran.
  • R. Babaie Department of Electrical Engineering, Imam Khomeini International University, Qazvin, Iran.
Abstract:

In this paper, using the State Dependent Riccati Equation (SDRE) method, we propose a Robust Optimal Integral Sliding Mode Controller (ROISMC) to guarantee an optimal control law for a quadrotor which has become increasingly important by virtue of its high degrees of manoeuvres ability in presence of unknown time-varying external disturbances and actuator fault. The robustness of the controller is ensured by an Integral Sliding Mode Controller (ISMC). Subsequently, based on Luenberger linear state estimator, the control algorithm is reformed and the actuator’s faults are detected. Moreover, design of the controller is based on Lyapunov method which can provide the stability of all system states during the tracking of the desired trajectory. The stability of suggested algorithm is verified via the execution of sudden maneuvers subjected to forcible wind disturbance and actuator faults while performing accurate attitude and position tracking by running an extensive numerical simulation. It is comprehended that the proposed optimal robust method can achieve much better tracking capability compared with conventional sliding mode controller.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Robust Controller Design Based on Sliding Mode Observer in The Presence of Uncertainties and Actuator Saturation

This paper studies the design of a robust output feedback controller subject to actuator saturation. For this purpose, a robust high-gain sliding mode observer is used to estimate the state variables. Moreover, the combination of Composite Nonlinear Feedback (CNF) and Integral Sliding Mode (ISM) controllers are used for robust output tracking. This controller consists of two parts, the CNF part...

full text

Adaptive Sliding Mode Controller Design For Attitude Small UAV

Received Apr 6 , 2015 Revised Aug 18 , 2015 Accepted Aug 26 , 2015 The dynamic of Unmanned Aerial Vehicle (UAV) is nonlinear, strongly coupled, multi-input multi-output (MIMO), and subject to uncertainties and external disturbances. In this paper, an adaptive sliding mode controller (ASMC) is integrated to design the attitude control system for an inner loop fixed wing UAV. In the proposed sche...

full text

Increase of Sliding Mode Controller Stability Limit

An important consideration in control issues is control of nonlinear systems. Sliding control is among those nonlinear controllers that can control the system desirably in the presence of unstructured uncertainties of carelessness in specifying parameters of the system. In sliding control, also called Variable Structure Control, the main objectives of the controller &#10are achieved by introduc...

full text

Increase of Sliding Mode Controller Stability Limit

An important consideration in control issues is control of nonlinear systems. Sliding control is among those nonlinear controllers that can control the system desirably in the presence of unstructured uncertainties of carelessness in specifying parameters of the system. In sliding control, also called Variable Structure Control, the main objectives of the controller are achieved by introducin...

full text

Integral sliding mode fault tolerant control schemes with control allocation

Integral Sliding Mode Fault Tolerant Control Schemes with Control Allocation Mirza Tariq Hamayun The key attribute of a Fault Tolerant Control (FTC) system is to maintain overall system stability and acceptable performance in the face of faults and failures within the system. In this thesis new integral sliding mode (ISM) control allocation schemes for FTC are proposed, which have the potential...

full text

Integral Sliding Mode Output Tracking Controller for Sampled-Data Systems

A new integral type sliding surface (ISM) is design for sampled-data systems for output tracking. ISM surface design is based on Output Feedback. Discrete-time control based on ISM achieves good tracking performance while allowing the pole assignment of m poles, where m is positive integer, which are otherwise zero in a deadbeat design. It will be shown in this work that, the discrete-time vers...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 15  issue 2

pages  243- 257

publication date 2019-06

By following a journal you will be notified via email when a new issue of this journal is published.

Keywords

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023