Optical pulse compression based on nonlinear silicon waveguides and chirped Bragg gratings

Authors

  • Arash Ahmadipour School of Engineering- Emerging technologies, University of Tabriz, Tabriz, Iran
  • Hadi Soofi School of Engineering- Emerging technologies, University of Tabriz, Tabriz, Iran
  • Hosein Tezkhan School of Engineering- Emerging technologies, University of Tabriz, Tabriz, Iran
Abstract:

Due to the growing demand for higher bandwidth, employing optical devices instead of electronic devices in data transmission systems has attracted much attention in recent years. Optical switches, modulators and wavelength converters are a few examples of the required optical devices. CMOS compatible fabrication of these devices, leads to much more growing of this technology. Optical pulse compression, is required for generating ultra-short pulses for high bandwidth optical transmission systems. In this work, we present a CMOS fabrication process compatible, integrated optical pulse compressor. A Silicon waveguide coated by MoS2 for nonlinearity enhancement is used for self-phase modulation and a chirped Bragg grating utilizing corrugated silicon waveguides is employed to achieve the required anomalous dispersion. Low power and high compression ratio were considered in this work. We achieved a compression ratio of 3.5 by using a relatively low power optical pulse of 8W and a short waveguide length of 1mm.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Bandwidth compression optical processor using chirped fiber Bragg gratings

Chirped fiber Bragg gratings are used as low-loss, dispersion compensation modules for telecommunications applications. Here we use them to make an optical processor that compresses the bandwidth of electronic signals before digitization by an analog-to-digital converter. ©2007 Optical Society of America OCIS codes: (230.0250) Optoelectronics, (060.2360) Fiber optics and optical communications ...

full text

Nonlinear magneto-optical Bragg gratings.

In magneto-optical gratings the magnetic dipolar coupling superimposed on the electric dipolar one introduces nonreciprocity and spectral discrimination between circular polarization states, measured by a Zeeman-like splitting of the photonic Bragg resonances. In a nonlinear regime the degree of nonreciprocity is modified by the photoinduced interplay of these splittings and their Stark-like sh...

full text

Pulse Switching in Nonlinear Fiber Bragg Gratings

The influence of the Kerr-like nonlinearity in the switching characteristics of fiber Bragg gratings is studied. Two types of apodization profiles are considered: uniform and raisedcosine apodized gratings. The influence of the bit-rate and the wavelength detuning of the incident pulses in the nonlinear response of the grating is analyzed. The deterioration in the pulses caused by the nonlinear...

full text

Design constraints of optical parametric chirped pulse amplification based on chirped quasi-phase-matching gratings.

Chirped quasi-phase-matching (QPM) gratings offer efficient, ultra-broadband optical parametric chirped pulse amplification (OPCPA) in the mid-infrared as well as other spectral regions. Only recently, however, has this potential begun to be realized [1]. In this paper, we study the design of chirped QPM-based OPCPA in detail, revealing several important constraints which must be accounted for ...

full text

Multichannel Bragg gratings in silicon waveguides with asymmetric sidewall modulation.

We demonstrate a new type of on-chip Bragg grating designed to possess multiple stopbands at predetermined wavelengths. By employing sidewall modulation to control the full width half-maximum and extinction ratio, and through the incorporation of multiple spatial frequencies into the gratings' periodicities, we show that Bragg reflection can be achieved at particular wavelengths of interest wit...

full text

Ultrafast all-optical Nth-order differentiator based on chirped fiber Bragg gratings.

In this letter we present a technique for the implementation of Nth-order ultrafast temporal differentiators. This technique is based on two oppositely chirped fiber Bragg gratings in which the grating profile maps the spectral response of the Nth-order differentiator. Examples of 1(st), 2(nd), and 4(th) order differentiators are designed and numerically simulated.

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 5  issue 1

pages  19- 23

publication date 2017-11-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023