Nitrate Removal from Aqueous Solutions using Green and Biodegradable Zerovalent Iron Nanoparticles
Authors
Abstract:
Background and objectives: Zerovalent iron nanoparticles (ZVIN) had high potential for nitrate removal from aqueous solutions due to high surface area and reactivity of them. The aim of this study was nitrate removal from aqueous solutions using environmentally friendly stabilized ZVIN. Methods: ZVIN were synthesized via chemical reduction by sodium borohydride. In order to preventing of ZVIN from being agglomerated these particles were stabilized by natural and green biopolymers of Guar gum and Xantan gum. Results: Xantan gum+ Guar gum stabilized ZVIN had the most efficiency for nitrate reduction from aqueous solutions. Results also revealed optimum contact times for nitrate removal were 100, 50 and 40 minutes for Bare, Guar gum and Xantan gum+ Guar gum stabilized ZVIN respectively. The optimum pH values for nitrate reduction were 2, 5 and 6 for Bare, Guar gum and Xantan gum+ Guar gum stabilized ZVIN respectively. Nitrate removal efficiency increased by increasing of ZVIN dosages (2 to 10 g/L) from 66.01 to 76.06, 83.43 to 91.36 and 89.47 to 96.16 percent for Bare, Guar gum and Xantan gum+ Guar gum stabilized ZVIN respectively. The results showed when nitrate dosages enhanced (from 100 to 400 mg/L) the efficiency of nitrate removal from aqueous solutions decreased from 66.17 to 47.97, 84.26 to 69.06 and 88.65 to 75.49 percent for Bare, Guar gum and Xantan gum+ Guar gum stabilized ZVIN respectively. Conclusion: Results of this study revealed that application of polymeric stabilizers caused increasing zero-valent iron nanoparticle efficiency in nitrate removal from aqueous solution.
similar resources
Nitrate Removal from Aqueous Solutions Using Granular Activated Carbon Modified with Iron Nanoparticles (RESEARCH NOTE)
Nitrate contamination of water resources and the growing concentration of nitrate endanger human health and the environment and considering its reduction strategies from water resources is important. The aim of this study was to investigate the possibility of removal of nitrate from aqueous solutions using granular activated carbon from grape wood coated with iron nanoparticles. The results sho...
full textModeling of Malachite Green Removal from Aqueous Solutions by Nanoscale Zerovalent Zinc Using Artificial Neural Network
The commercially available nanoscale zerovalent zinc (nZVZ) was used as an adsorbent for the removal of malachite green (MG) from aqueous solutions. This material was characterized by X-ray diffraction and X-ray photoelectron spectroscopy. The advanced experimental design tools were adopted to study the effect of process parameters (viz. initial pH, temperature, contact time and initial concent...
full textHexavalent Chromium Removal from Aqueous Solutions by Adsorption onto Synthetic Nano Size ZeroValent Iron (nZVI)
The present work was conducted for the synthesis of nano size zerovalent iron (nZVI) and hexavalent chromium (Cr(VI)) removal as a highly toxic pollutant by using this nanoparticles. Batch experiments were performed to investigate the effects of Cr(VI), nZVI concentration, pH of solution and contact time variation on the removal efficiency of Cr(VI). nZVI was synthesized by reduction of ferric ...
full textRemoval of p-chlorophenol from aqueous solution using ultraviolet/zerovalent-iron (UV/ZVI)/persulfate process
In this study, degradation of p-chlorophenol (p-CP) was evaluated using persulfate (PS) activated zerovalent iron (ZVI) based ultraviolet (UV) in a bench scale photoreactor. The effect of operational parameters such as solution pH (3, 7, and 11), reaction time (0-60 minutes), ZVI dosage (0.15, 1.25, 0.5, 1, and 1.5 mM), PS concentration (0.5, 1.5, 2, 2.5, 3, and 4 mM), and initial p-CP concentr...
full textBiochar-supported zerovalent iron for removal of various contaminants from aqueous solutions.
This work describes the synthesis and testing of a novel environmental sorbent that combines the advantages of biochar, chitosan, and zerovalent iron (ZVI). Chitosan was used as a dispersing and soldering reagent to attach fine ZVI particles onto bamboo biochar surfaces. Characterization of the resulted ZVI-biochar composites (BBCF) indicated that chitosan effectively soldered the iron particle...
full textMy Resources
Journal title
volume 6 issue 3
pages 311- 325
publication date 2019-06
By following a journal you will be notified via email when a new issue of this journal is published.
No Keywords
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023