New Legionella Control Options by UV and Violet LEDs for Hospitals and Care Facilities
Authors
Abstract:
Legionella infections caused by contaminated water are a widespread problem worldwide. Discharge lamps like mercury vapor lamps are widely known for the disinfection properties of their radiation, but they suffer technical disadvantages, like high voltages and toxic content, and are, therefore, not suitable for some infection control applications. New high-intensity ultraviolet (UV) and violet LEDs offer new approaches for Legionella control, because these bacteria are significantly light sensitive compared to other pathogens. One of the most important infection pathways is the inhalation of Legionella-containing aerosols during showering. This problem could be reduced by a single strong UV LED within the shower head, which irradiates the passing water for some milliseconds. This practice can be especially beneficial in hospitals and care facilities. UV light offers only a limited penetration depth, however, even in pure water. To disinfect larger water volumes, e.g., in water dispensers, visible violet LEDs are more appropriate. Unfortunately, up to now, neither approach has been given much attention by potential users.
similar resources
development and implementation of an optimized control strategy for induction machine in an electric vehicle
in the area of automotive engineering there is a tendency to more electrification of power train. in this work control of an induction machine for the application of electric vehicle is investigated. through the changing operating point of the machine, adapting the rotor magnetization current seems to be useful to increase the machines efficiency. in the literature there are many approaches wh...
15 صفحه اولpreparation and characterization of new co-fe and fe-mn nano catalysts using resol phenolic resin and response surface methodology study for fischer-tropsch synthesis
کاتالیزورهای co-fe-resol/sio2و fe-mn-resol/sio2 با استفاده از روش ساده و ارزان قیمت همرسوبی تهیه شدند. از رزین پلیمری resol در فرآیند تهیه کاتالیزور استفاده شد.
Maskless photolithography using UV LEDs.
A UV light emitting diode (LED) with a maximum output of 372 nm was collimated using a pinhole and a small plastic tube and focused using a microscope objective onto a substrate for direct lithographic patterning of the photoresist. Movement of the substrate with a motorised linear stage (syringe pump) allowed lines in SU-8 to be pattered with a width down to 35 microm at a linear velocity of 8...
full textPhototherapy and exchange transfusion for neonatal hyperbilirubinaemia: neonatal academic hospitals' consensus guidelines for South African hospitals and primary care facilities.
The purpose of this document is to address the current lack of consensus regarding the management of hyperbilirubinaemia in neonates in South Africa. If left untreated, severe neonatal hyperbilirubinaemia may cause kernicterus and ultimately death and the severity of neonatal jaundice is often underestimated clinically. However, if phototherapy is instituted timely and at the correct intensity ...
full texta new algorithm and software of individual life insurance and annuity computation
چکیده ندارد.
15 صفحه اولDesign and Performance of Nitride-based UV LEDs
In this paper, we overview several of the critical materials growth, design and performance issues for nitride-based UV (< 400 nm) LEDs. The critical issue of optical efficiency is presented through temperature-dependent l]ilotoiull~inesccncc studies of various IJV active regions. These studies demonstrate enhanced optical efficiencies for active regions with Incontaining alloys ( InGrN, AIInGa...
full textMy Resources
Journal title
volume 3 issue 3
pages 76- 78
publication date 2018-04-28
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023