Multiple performance characteristics optimization for Al 7075 on electric discharge drilling by Taguchi grey relational theory
Authors
Abstract:
Electric discharge drill machine (EDDM) is a spark erosion process to produce micro-holes in conductive materials. This process is widely used in aerospace, medical, dental and automobile industries. As for the performance evaluation of the electric discharge drilling machine, it is very necessary to study the process parameters of machine tool. In this research paper, a brass rod 2 mm diameter was selected as a tool electrode. The experiments generate output responses such as tool wear rate (TWR). The best parameters such as pulse on-time, pulse off-time and water pressure were studied for best machining characteristics. This investigation presents the use of Taguchi approach for better TWR in drilling of Al-7075. A plan of experiments, based on L27 Taguchi design method, was selected for drilling of material. Analysis of variance (ANOVA) shows the percentage contribution of the control factor in the machining of Al-7075 in EDDM. The optimal combination levels and the significant drilling parameters on TWR were obtained. The optimization results showed that the combination of maximum pulse on-time and minimum pulse off-time gives maximum MRR.
similar resources
Optimization of gas metal arcwelding parameters of SS304 austenitic steel by Taguchi –Grey relational analysis
This study investigated the optimization of three welding parameters (wire feed speed, arc voltage, and shielding gas flow rate) for SS 304H by using Taguchi based Grey relational analysis. In this research work, pure argon was used as shielding gas. Numbers of trials were performed as per L16 (4xx3) orthogonal array design and the mechanical quality such ultimate tensile strength, microhardnes...
full textTaguchi-grey relational based multi response optimization of electrical process parameters in electrical discharge machining
In modern machining process, optimization technique is used to find the optimal values of input parameters and the effect of those parameters on response variables. If response parameters are more than one, Taguchi method of optimization may give different set of optimal levels for each response. In the present study, Taguchi-grey relational approach based multi response optimization has been u...
full textOptimization of Injection Molding Parameters for HDPE/TiO2 Nanocomposites Fabrication with Multiple Performance Characteristics Using the Taguchi Method and Grey Relational Analysis
The current study presents an investigation on the optimization of injection molding parameters of HDPE/TiO₂ nanocomposites using grey relational analysis with the Taguchi method. Four control factors, including filler concentration (i.e., TiO₂), barrel temperature, residence time and holding time, were chosen at three different levels of each. Mechanical properties, such as yield strength, You...
full textMulti-Response Optimization of Resin Finishing by Using a Taguchi-Based Grey Relational Analysis
In this study, the influence and optimization of the factors of a non-formaldehyde resin finishing process on cotton fabric using a Taguchi-based grey relational analysis were experimentally investigated. An L27 orthogonal array was selected for five parameters and three levels by applying Taguchi's design of experiments. The Taguchi technique was coupled with a grey relational analysis to obta...
full textOptimization of process parameters by Taguchi based Grey Relational Analysis: A Review
The aim of this paper to review the Taguchi based Grey relational analysis is used to find the best process parameters and improved quality results. The GRA was proposed to optimize the multi response problem by making use of the grey relational coefficient and grey relational grade. GRA is attempted to integrate multiple responses, it is feasible to combine GRA with Taguchi method to provide a...
full textJournal of Engineering, Computers & Applied Sciences (JEC&AS) ISSN No: 2319-5606 Volume 1, No.3, December 2012 _________________________________________________________________________________
Electric Discharge Drill Machine (EDDM) is a spark erosion process to produce micro holes in conductive materials. This process is widely used in aerospace, medical, dental and automobile industries. As for the performance evaluation of the Electric discharge drilling machine it is very necessary to study the process parameters of machine tool. In this research paper a brass rod 2 mm diameter w...
full textMy Resources
Journal title
volume 11 issue 4
pages -
publication date 2015-12-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023