Monopole Antenna Radar Cross Section Reduction with Plasma Helix

Authors

  • Keyvan Forooraghi School of Electrical and Computer Engineering, Tarbiat Modares Universty, Tehran, Iran
  • Mohsen KHadir School of Electrical and Computer Engineering, Tarbiat Modares Universty, Tehran, Iran
  • Zahra Atlasbaf School of Electrical and Computer Engineering, Tarbiat Modares Universty, Tehran, Iran
Abstract:

In this paper, a new method for radar cross section reduction of a monopole antenna is proposed. In this method, a plasma helix like fluorescent bulbs is placed around the antenna element. The selected plasma parameter for this medium acts as an absorber without disturbing the antenna performance. The simulations show that radar cross section of simulated antenna is reduced in a wide frequency range. In this paper, the plasma parameter is chosen in such a way that reduces RCS at 4GHz. At this frequency, the radar cross section reduction is about 10dBsm. Due to the frequency dependent of the plasma medium, the plasma parameter must be changed for better result in the other frequencies. This change can be performed electrically without any change in the antenna structure. In this simulation, a PEC rode with 3cm diameter and 15cm height is chosen for the monopole antenna element. This monopole antenna resonates at 630 MHz. After placing the plasma helix around the antenna element, there is no significant change in the antenna performance.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

A Low Radar Cross Section Dipole Antenna Simulation

This paper reports a new method for reducing the Radar Cross-Section (RCS) of a metal backed dipole antenna. Numerical simulations are used to show that when the Perfect Electrical Conductor (PEC) is replaced by a carefully designed Frequency Selective Surface (FSS), the electromagnetic performance of the antenna is similar in band, but the RCS of the structure is significantly lower out of ban...

full text

تحلیل آنتن پلاسمای ستونی با تحریک موج سطحی

This theoretical study examines the characteristics of a surface wave driven plasma monopole antenna using finite difference time domain method (FDTD) as well as commercial full wave simulator. The results show that the full wave simulator can be considered as an acceptable tool in simulation of a plasma antenna. Input impedance, radiation pattern, gain, efficiency and radar cross section of pl...

full text

A New Omni-directional Monopole Antenna for Interference Reduction

A compact Ultra wideband (UWB) antenna with bandnotched characteristic is presented in this paper. It has compact size of 30 mm x 31mm and has ultra wide band operation. A ‘C’ shaped slot was introduced to achieve band notch function from 4.8 GHz to 6 GHz to avoid interference from WLAN. The proposed antenna has ultra wide band frequency range from 3 GHz to 11.5 GHz for return loss below -10 dB...

full text

Radar Cross-Section Estimation of SAR Images

We present an algorithm that is able to smooth out the speckle from many SAR images and which does not suuer from the drawbacks of multilooking. The algorithm is able to preserve the detail and resolution of the original image while producing a smooth, real-valued output. In many cases the quality of the smoothed image is suuciently high that it may be used with standard optical post-processing...

full text

Radar Cross Section of Phased Array with Parallel Feed Network

The scattering characteristics of a phased array depends on its feed network. The variation of scattered fields within the feed network affects the antenna mode scattering. In this paper, an attempt is made to determine the radar cross section (RCS) of a planar array with parallel-feed network. The scattered field of the array is obtained by following the path of the signals through the antenna...

full text

Radar cross section reduction of a cavity in the ground plane

This paper investigates the reduction of backscatter radar cross section (RCS) for a rectangular cavity embedded in the ground plane. The bottom of the cavity is coated by a thin, multilayered radar absorbing material (RAM) with possibly different permittivities. The objective is to minimize the backscatter RCS by the incidence of a plane wave over a single or a set of incident angles. By formu...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 5  issue 1

pages  37- 41

publication date 2017-11-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023