Modification of Polymeric Membrane for Energy Generation through Salinity Gradient: A Short Review

Authors

  • A.F. Ismail Advanced Membrane Technology Center (AMTEC), Universiti Teknologi Malaysia, 81310 Skudai, Johor Bahru, Malaysia
  • Syafiq Izzany Sharudin Advanced Membrane Technology Research Centre, School of Chemical and Energy Engineering, Faculty of Engineering, Universiti Teknologi Malaysia, 81310 Johor Bahru, Malaysia
Abstract:

Salinity gradient energy (SGE) refers to the energy created from the difference in salt concentration between two streams. There are three types of SGE namely, pressure retarded osmosis (PRO), reverse electrodialysis (RED), and capacitive mixing (CapMix). All these technologies require membrane for the system to be operational. In this short review, the membranes modifications for each principle and its strategies in improving the performance of their membranes are presented. The technological progress of SGE is currently constrained by its ability in generating low power density. Thus, further modifications on every aspect of the systems is needed to overcome this bottleneck. This review focuses on the modifications of polymer-based membranes for salinity gradient energy generation. Finally, some challenges and future perspective of SGE development are discussed.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Reverse Electrodialysis for Salinity Gradient Power Generation: Challenges and Future Perspectives

Salinity gradient energy, which is also known as Blue energy, is a renewable energy form that can be extracted from the mixing of two solutions with different salinities. About 80% of the current global electricity demand could potentially be covered by this energy source. Among several energy extraction technologie...

full text

Polymeric Membrane Sensor for Potentiometric Determination of Tin(II) Ions

Tin(II)-ion-selective electrode consisting of dibenzo-18-crown-6 (DB18C6) as an ionophore inPVC matrix was developed. The influences of membrane composition, selectivity, response time,reversibility and temperature on the electrode performance were investigated. The electrodeshowed a near Nernstian response for Sn2+ ions over a concentration range from 1.0× 10-6 – 1.0× 10-2 M with a slope of 27...

full text

A Review of Membrane Technology for Integrated Forest Biorefinery

More recently, the concept of integrated forest biorefinery (IFBR) has received much attention as a promising solution for the struggling forest industry in North America and Europe to overcome its difficult financial period and competes globally. This new business paradigm offers a broad range of potentially attractive products, from bioenergy to value-added green organic chemicals in addition...

full text

modification of nanoclay for improving the physico-mechanical properties of dental adhesives

هدف اصلی این مطالعه تهیه یک سامانه نوین چسب عاجی دندانی بر پایه نانورس پیوند شده با پلی متاکریلیک اسید، نانورس پیوند شده با پلی اکریلیک اسید، مخلوط نانوسیلیکا و نانورس پیوند شده با پلی متاکریلیک اسید، مخلوط نانوسیلیکا و نانورس پیوند شده با پلی اکریلیک اسید و نانورس پیوند شده با کیتوسان اصلاح شده با گلایسیدیل متاکریلات است. پیوند پلی متاکریلیک اسید و پلی اکریلیک اسید بر ری سطح نانورس در حضور و ...

Capacitive mixing power production from salinity gradient energy enhanced through exoelectrogen- generated ionic currents†

Several approaches to generate electrical power directly from salinity gradient energy using capacitive electrodes have recently been developed, but power densities have remained low. By immersing the capacitive electrodes in ionic fields generated by exoelectrogenic microorganisms in bioelectrochemical reactors, we found that energy capture using synthetic river and seawater could be increased...

full text

Evaluation of Vapor Deposition Techniques for Membrane Pore Size Modification

The suitability of three vapor deposition techniques for pore size modification was evaluated using polycarbonate track etched membranes as model supports. A feature scale model was employed to predict the pore geometry after modification and the resulting pure water flux. Physical vapor deposition (PVD) and pulsed plasma-enhanced chemical vapor deposition (PECVD), naturally, form asymmetric na...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 6  issue 2

pages  168- 177

publication date 2020-04-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023