Mechanical properties of SEVA / hydroxyapatite composite with to HAP different particle sizes
Authors
Abstract:
Hydroxyapatite is a biocompatible ceramic and reinforcement for bone implantations. SEVA/HAP composite content HAP filler with difference particle sizes were designed. Mechanical tests like tensile modulus, UTS, strain at break and biodegradation were investigated. Results illustrated much increase tensile modulus of composites content HAP nano powders ratio to micro powders. Also UTS analysis of composites illustrated much increase UTS of composites content HAP nano powders ratio to micro powders and strain at break analysis of composites illustrated much decrease of strain at break composites content HAP nano powders ratio to micro powders. The composites degradation in PBS solution showed slowly degradation time of composites content HAP nano powders ratio to micro powders filler.
similar resources
mechanical properties of seva / hydroxyapatite composite with to hap different particle sizes
hydroxyapatite is a biocompatible ceramic and reinforcement for bone implantations. seva/hap composite content hap filler with difference particle sizes were designed. mechanical tests like tensile modulus, uts, strain at break and biodegradation were investigated. results illustrated much increase tensile modulus of composites content hap nano powders ratio to micro powders. also uts analysis ...
full textMechanical properties of hydroxyapatite whisker reinforced polyetherketoneketone composite scaffolds.
The apparent mechanical properties of hydroxyapatite (HA) whisker reinforced polyetherketoneketone (PEKK) scaffolds were evaluated in unconfined, uniaxial compression to investigate the effects of the porosity (75%, 82.5% and 90%), HA content (0, 20 and 40 vol%) and mold temperature (350, 365 and 375 ( composite function)C). Increased porosity resulted in a non-linear decrease in the elastic mo...
full textStudy of milling effect on particle size and mechanical properties of WC-Co composite
The effect of milling on the particle size and mechanical properties Tungsten Carbide - Cobalt composite were investigated. First, raw materials ratios by mechanical milling for 4 hours at 300 rpm were mixed. The powder in the optimum temperature 1350°C at a rate of temperature rise 50°C / min and shelf life of 4 minutes and the pressure MPa 30 were sintered in SPS. The results indicated nearly...
full textStudy of milling effect on particle size and mechanical properties of WC-Co composite
The effect of milling on the particle size and mechanical properties Tungsten Carbide - Cobalt composite were investigated. First, raw materials ratios by mechanical milling for 4 hours at 300 rpm were mixed. The powder in the optimum temperature 1350°C at a rate of temperature rise 50°C / min and shelf life of 4 minutes and the pressure MPa 30 were sintered in SPS. The results indicated nearly...
full textEffect of TiO2 Particle Concentration on Microstructure and Mechanical Properties of Ni-P-TiO2 Composite Coatings
Ferritic stainless steels are widely used in equipment, including parts in turbines, electrical industries, aerospace, automotive and decorating industries. One of the problems with this type of steels is their low wear resistance. One of the ways to overcome this problem is to apply a wear-resistant coating on the surface of steel. In this research, nickel phosphorus-titanium oxide coating was...
full textMy Resources
Journal title
volume 1 issue 2
pages 103- 109
publication date 2010-12-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023