Least-squares support vector machine and its application in the simultaneous quantitative spectrophotometric determination of pharmaceutical ternary mixture
Authors
Abstract:
This paper proposes the least-squares support vector machine (LS-SVM) as an intelligent method applied on absorption spectra for the simultaneous determination of paracetamol (PCT), caffeine (CAF) and ibuprofen (IB) in Novafen. The signal to noise ratio (S/N) increased. Also, In the LS - SVM model, Kernel parameter (σ2) and capacity factor (C) were optimized. Excellent prediction was shown using LS-SVM, with lower root mean square error (RMSE) and relative standard deviation (RSD). In addition, Regression coefficient (R2), correlation coefficient (r) and mean recovery (%) of this method obtained for PCT, CAF and IB. LS- SVM / spectrophotometry method is reliable for simultaneous quantitative analysis of components in commercial samples. The results obtained from analyzing the real sample by the proposed method compared to the high- performance liquid chromatography (HPLC) as a reference method. One-way analysis of variance (ANOVA) test at 95% confidence level used and results showed that there was no significant difference between suggested and reference methods.
similar resources
Partial least squares- least squares- support vector machine modeling of ATR-IR as a spectrophotometric method for detection and determination of iron in pharmaceutical formulations
Iron is an essential element used as supplement in different dosage-forms. Different time and expenditure-consuming methods introduced for detection and determination of elemental ions such as atomic absorption. In this research, two different and routine methods containing ATR-IR and atomic absorption were applied to define the amount of iron in 198 samples containing different concentrations ...
full textPartial least squares- least squares- support vector machine modeling of ATR-IR as a spectrophotometric method for detection and determination of iron in pharmaceutical formulations
Iron is an essential element used as supplement in different dosage-forms. Different time and expenditure-consuming methods introduced for detection and determination of elemental ions such as atomic absorption. In this research, two different and routine methods containing ATR-IR and atomic absorption were applied to define the amount of iron in 198 samples containing different concentrations ...
full textLeast Squares Support Vector Machine for Constitutive Modeling of Clay
Constitutive modeling of clay is an important research in geotechnical engineering. It is difficult to use precise mathematical expressions to approximate stress-strain relationship of clay. Artificial neural network (ANN) and support vector machine (SVM) have been successfully used in constitutive modeling of clay. However, generalization ability of ANN has some limitations, and application of...
full textSpectrophotometric Determination of Corticosteroids and Its Application in Pharmaceutical Formulation
A simple, sensitive and economically viable spectrophotometric method for the determination of corticosteroids (predinsolone {PSL}, dexamethasone {DEX}, prednisone {PS}, betamethasone sodium phosphate {BEP} and hydrocortisone {HYD} has been developed. The method involves the oxidation of corticosteroids by iron (III) and subsequent complexation of iron (II) with potassium hexacynoferrate (III),...
full textSimultaneous spectrophotometric determination of carbidopa and levodopa by partial least squares regression, principal component regression and least squares support vector machine methods
Three chemometric methods; partial least squares regression (PLS), principal component regression (PCR) and least-squares support vector machines (LS-SVM) were applied for simultaneous determination of carbidopa and levodopa in synthetic mixtures and real samples. The simultaneous determination of these drugs is a difficult problem due to spectral interferences. The proposed methods were used f...
full textSpectrophotometric simultaneous determination of nickel, cobalt and copper by orthogonal signal correction–partial least squares
A method for the simultaneous spectrophotometric determination of nickel, cobalt and copper based on theformation of their complexes with 2-(2-Thiazolylazo)-p-Cresol (TAC) in micellar media of Triton X-100 isproposed. The absorbance spectra were recorded in the range of 500 to 800 nm. The linear concentrationrange for nickel, cobalt and copper in solution calibration sets were 0.05–1.80, 0.10–6...
full textMy Resources
Journal title
volume 14 issue 3
pages 25- 36
publication date 2018-07-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023