Investigation of Possible Usage of Electric Arc Furnace Dust in Cement Industry
Authors
Abstract:
Synopsis-In this research, possible usage of EAF dust on cement is investigated. Therefore, effects of addition of different percentages of EAF dust on the most important properties of cement such as hydration heat, water coefficient, viscosity, initial and final setting times, strength development and leachability of heavy metals were studied. Results showed that EAF dust alters the characteristics of cement unfavorably. So, it cannot be used for construction purposes. However, a prior soaking of EAF dust in water eliminates alkaline compounds which causes unfavorable alternation of cement characteristics and hence, engineering properties of the mixtures enhance especially long term strength of hardened mixtures. Leaching tests also proved that heavy metals contents of the leachates are considerably below the nonhazardous leachates limits. The above results document the perspectives of soaked EAFD solidification, disposal and the use of this waste material as a new additive to building materials.
similar resources
investigation of possible usage of electric arc furnace dust in cement industry
synopsis-in this research, possible usage of eaf dust on cement is investigated. therefore, effects of addition of different percentages of eaf dust on the most important properties of cement such as hydration heat, water coefficient, viscosity, initial and final setting times, strength development and leachability of heavy metals were studied. results showed that eaf dust alters the characteri...
full textPotential Reuse of Electric-Arc Furnace Dust (EAFD) in Concrete
This study investigated electric arc furnace dust (EAFD) reuse as a raw material in concrete mixes. A comprehensive experimental program consisting of two phases of testing was carried out. The first phase included the replacement of ordinary Portland (Type I) cement by unsieved dust with the percentages of 0, 2.5, 5, 7.5 and 10%. The second phase included the replacement of quartz (filler) by ...
full textA KINETIC STUDY ON THE CARBOTHERMIC REDUCTION OF ZINC OXIDE FROM ELECTRIC ARC FURNACE DUST
In the present study, reduction of zinc oxide from the pellets made of steelmaking electric arc furnace dust has been investigated. Effects of such parameters as the type of carbon material (graphite, coke and charcoal) as well as time and temperature on the reduction reaction have been examined. The reduced (dimensionless) time method was applied to perform a kinetic analysis of the system. Ex...
full textRecycling Evaluation of Mill Scale in Electric Arc Furnace
A considerable amount of mill scale is generated from steelmaking plants annually. Although some industries use it as raw material however, since it contains iron in the form of FeO, Fe2O3, and Fe3O4, it can be considered as a valuable metallurgical raw material for iron and steelmaking industry as well. Thus, the aim of this study was to evaluate the possibility, efficiency, and consequences o...
full textElectric Arc Furnace Slag and Blast Furnace Dust, Use for the Manufacture of Asphalt Concrete for Roads
This paper analyzes how feasible it is to use electric arc furnace slag as coarse aggregate, and blast furnace dust as fine aggregate in the manufacture of hot asphalt concrete for roads. Three mixtures were designed using the Ramcodes methodology, the M1 mixture of control with conventional materials, the M2 mixture replacing 50% and the M3 mixture replacing 100% of the conventional aggregates...
full textVitrification of electric arc furnace dusts.
Electric arc furnace baghouse dust (EAFD), a waste by-product of the steelmaking process, contains the elements that are volatilized from the charge during the melting (Cr, Pb, Zn, Cu and Cd). The results of leaching tests show that the concentration of these elements exceeds the regulatory limits. Consequently, EAFD cannot be disposed of in ordinary landfill sites without stabilization of the ...
full textMy Resources
Journal title
volume 6 issue 1
pages 9- 13
publication date 2009-06-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023