Investigation of ozone and coagulant material’s (aluminum sulfate, ferric chloride, poly aluminum chloride and lime) efficiency in “Kerman Kork” industry wastewater treatment
Authors
Abstract:
Background: Entry of untreated wastewater of wool scouring factories has been associated with many environmental hazards because of high rate of pollution. Presently effective treatment methods and reducing the costs of operation and maintenance from treatment units have always been under the attention of this industry owners. The aim of this survey is to present a suitable method for the treatment of wool scouring. Methods: In this study, chemical coagulant is used for wastewater treatment (aluminum sulfate, ferric chloride, poly aluminum chloride and lime). And then these materials with “ozone” as a strong oxidative in reduction of the amount of Chemical Oxygen Demand (COD) in wastewater effluent has been surveyed. Results: The results of this work showed that only ferric chloride and aluminum sulfate among the above chemical coagulant had a high efficiency in the turbidity removal. Productivity of turbidity removal using ferric chloride with the pH of 4 to 5 was 99%, and turbidity was reduced from 166 Nephelometric Turbidity Units (NTU) to 1.5 NTU, and productivity of turbidity removal using aluminum sulfate within the pH 4.5 to 5 was 99.33% that reduced turbidity from 166 to 1.1 NTU. Results of ozonation with 5 g/hour and the oxygen flow of 2.5 litter per min with the pH assess of 15, 30, 45, 60, 90, 120, and 150 min to wastewater from chemical treatment with ferric chloride showed that the rate of COD was reduced from 24700 mg/L to 2940 mg/L. In ozonation to wastewater of chemical treatment with aluminum sulfate within the above rang of time, the rate of COD was reduced from 22500 mg/l to 4800 mg/l. Conclusion: We can be hopeful that in near future, getting the cheap technology of ozone production in industrial scale, one can use this technology for the propose of removal of pollutants having removal preferable by help of advanced treatment approaches.
similar resources
investigation of ozone and coagulant material’s (aluminum sulfate, ferric chloride, poly aluminum chloride and lime) efficiency in “kerman kork” industry wastewater treatment
background: entry of untreated wastewater of wool scouring factories has been associated with many environmental hazards because of high rate of pollution. presently effective treatment methods and reducing the costs of operation and maintenance from treatment units have always been under the attention of this industry owners. the aim of this survey is to present a suitable method for the treat...
full textPerformance Evaluation of Tile Wastewater Treatment with Different Coagulants
Introduction: The objective of this study was, wastewater quality investigation and removal efficiency of contaminants from the wastewater tile factory by using coagulants includes ferric chloride, ferric sulfate and ferrous, aluminum sulfate and poly aluminum chloride in order to reuse it in the processing line. Methods: This is an applied study. With regard to shiftwork schedules of the facto...
full textOptimization of Coagulation and Flocculation Process in Wastewater Treatment of the Food Industry: A Laboratory Study
Background and Objectives: Food industry wastewater has a high pollution load, which is due to water consumption at various stages. In the absence of adequate wastewater management and supervision of the food industry, this wastewater can be considered as a source of environmental pollution. This study aimed to optimize the coagulation and flocculation process for the treatment of food industry...
full textFerric Chloride in Wastewater Treatment
Wastewater Treatment Facilities have been built to remove biological and chemical waste from water as it is used. These facilities maintain a healthy environment for organisms as well as people because it removes potentially harmful material and kills pathogens that would easily spread through cities. Phosphorus is a compound of interest because a high concentration of it at discharge will even...
full textperformance evaluation of tile wastewater treatment with different coagulants
introduction: the objective of this study was, wastewater quality investigation and removal efficiency of contaminants from the wastewater tile factory by using coagulants includes ferric chloride, ferric sulfate and ferrous, aluminum sulfate and poly aluminum chloride in order to reuse it in the processing line. methods: this is an applied study. with regard to shiftwork schedules of the fact...
full textPerformance Evaluation of Tile Wastewater Treatment with Different Coagulants
Introduction: The objective of this study was to investigate wastewater quality and the efficiency of removal of wastewater contaminants produced by a tile factory by using ferric chloride, ferrous sulfate, ferric sulfate, aluminum sulfate (alum) and poly-aluminum chloride (PAC) coagulants. Materials and Methods: This is an applied study. A composite sample was taken of the wastewater producti...
full textMy Resources
Journal title
volume 2 issue None
pages 1- 6
publication date 2015-02
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023