Investigation of carbon dioxide capture from hydrogen using the thermal pressure swing adsorption process: Central composite design modeling

Authors

  • Ali Saberimoghaddam Department of Chemistry and Chemical Engineering, Malek Ashtar University of Technology
  • vahid khebri Department of Chemistry and Chemical Engineering, Malek Ashtar University of Technology
Abstract:

In this study pre-combustion capture of carbon dioxide from hydrogen was performed using a 5A zeolite adsorber. A one column thermal pressure swing adsorption (TPSA) process was studied in the bulk separation of a CO2/H2 mixture (50:50 vol%). The adsorption dynamics of the zeolite bed were investigated by breakthrough experiments to select the suitable range for operational factors in the design of experiments. Combined effect of three important variables namely, adsorption time, purge to feed ratio, and regeneration temperature on hydrogen purity, recovery and productivity were investigated in the TPSA process using Response Surface Methodology (RSM). Predicted models show an interaction between adsorption time and regeneration temperature in the range that the experiments were performed. Optimization of the TPSA process was performed based on the goal of responses. As hydrogen purity has the large impact with respect to hydrogen recovery and productivity in industry, the optimum condition was proposed based on maximum purity of hydrogen. In this condition, predicted values for adsorption time, purge to feed ratio, and regeneration temperature were 7.99 min, 0.2, and 204 °C, respectively. Predicted values of responses for hydrogen purity, recovery, and productivity were 99.88%, 50.71%, and 1.32, respectively. Acquired models were validated by experimental data in predicted conditions and actual responses were very close to predicted values. These results confirmed the accuracy of obtained models.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

Carbon Dioxide Capture and Hydrogen Purification from Synthesis Gas by Pressure Swing Adsorption

Global warming has become more and more serious, which is caused by greenhouse gases. Cutting down the emission of CO2 has already become one of the major research target in the world. This study utilized a pressure swing adsorption (PSA) process to separate high-purity hydrogen and to capture CO2 from synthesis gas, which is the effluent stream of water-gas-shift reactor. The purified H2 can b...

full text

Experimental Investigation and Modeling of Carbon Dioxide Adsorption from Model Flue gas

In this work, the adsorption of carbon dioxide from model flue gas on different adsorbents has been investigated. Using simplified modeling, parameters such as the total mass transfer coefficient and the effective diffusivity have been determined. Experiments were carried out in two sections: firstly, adsorption of pure carbon dioxide on different adsorbents was measured at pressures ranging fr...

full text

Capture of Co 2 by Vacuum Swing Adsorption Process Using Activated Carbon Beads

Pitch-based AC beads (particle size about 1mm) were synthesized from coal tar pitch through the emulsion method without using binder material in our laboratory. Adsorption equilibrium and adsorption kinetics of CO2 and N2 on the activated carbon beads were studied experimentally and theoretically. Based on the equilibrium and kinetics data, an improved vacuum-pressure swing adsorption (VPSA) pr...

full text

Process intensification in duplex pressure swing adsorption

As an alternative to the pressure swing adsorption (PSA) based on the Skarstrom cycle or its variants, a novel two-bed PSA--called duplex PSA--has been proposed by Hirose and independently by Leavitt to get both products of high purities. Simulation and experimental studies on duplex PSA for CO2 capture indicate that CO2 can be enriched to 95 mol% of feed containing 20 mol% CO2 and 80 mol% N2. ...

full text

a study on the design of bio-ethanol process from date wastes of sistan and baluchistan province

اتانول کاربردهای متنوعی در صنایع لاستیک سازی، رنگسازی، حلالها ومکمل سوخت خودرو دارد. اتانول برخلاف نفت از جمله مواد تجدیدپذیر محسوب می شود که مشکلات زیست محیطی و آلودگی نیز ایجاد نمی کند. استفاده از اتانول به عنوان مکمل سوختخودروها از جمله مهمترین مصارف صنعتی این ماده بشمار می رود. با توجه به این موضوع تحقیق و توسعه در زمینه تولید اتانول با درجه خلوص بالا در سطح جهان، و نه تنها در کشور های پیشر...

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 4  issue 1

pages  13- 26

publication date 2017-08-21

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023