Influence of current density on refractive index of p-type nanocrystalline porous silicon
Authors
Abstract:
Porous Silicon (PS) layers have been prepared from p-type silicon wafers of (100) orientation. SEM, XRD, FTIR and PL studies were done to characterize the surface morphological and optical properties of PS. The porosity of the PS samples was determined using the parameters obtained from SEM images by geometric method. The refractive index values of the PS samples as a function of porosity were determined by Effective Medium Approximation methods. The influence of current density on porosity and refractive index of PS, were discussed. SEM images indicated that the pores are surrounded by a thick columnar network of silicon walls. This porous silicon layer can be considered as a sponge like structure. The sizes of PS nanocrystallites were determined by XRD studies. FTIR spectra indicated that the porous layer contain SiHn complexes. PL study reveals that there is a prominent emission peak at 606 nm. No spectral shift was observed. These results suggest that this nanocrystalline porous silicon could be a potential candidate for optical as well as optoelectronic device applications.
similar resources
Control capability of electrolytic concentration on refractive index and dielectric constant of porous Silicon layers
Porous Silicon (PS) samples have been prepared by electrochemical anodization of p-type silicon wafer by varying HF concentrations in the electrolytic solution. The structural, surface morphological, optical and surface composition analysis of the prepared samples were done by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Photoluminescence (PL) and Fourier transform infr...
full textControl capability of electrolytic concentration on refractive index and dielectric constant of porous Silicon layers
Porous Silicon (PS) samples have been prepared by electrochemical anodization of p-type silicon wafer by varying HF concentrations in the electrolytic solution. The structural, surface morphological, optical and surface composition analysis of the prepared samples were done by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Photoluminescence (PL) and Fourier transform infr...
full textPorous Silicon Gradient Refractive Index Micro-Optics.
The emergence and growth of transformation optics over the past decade has revitalized interest in how a gradient refractive index (GRIN) can be used to control light propagation. Two-dimensional demonstrations with lithographically defined silicon (Si) have displayed the power of GRIN optics and also represent a promising opportunity for integrating compact optical elements within Si photonic ...
full textcontrol capability of electrolytic concentration on refractive index and dielectric constant of porous silicon layers
porous silicon (ps) samples have been prepared by electrochemical anodization of p-type silicon wafer by varying hf concentrations in the electrolytic solution. the structural, surface morphological, optical and surface composition analysis of the prepared samples were done by x-ray diffraction (xrd), scanning electron microscopy (sem), photoluminescence (pl) and fourier transform infrared (fti...
full textChange of diffused and scattered light with surface roughness of p-type porous Silicon
Porous silicon samples were prepared by electrochemical etching method for different etching times. The structural properties of porous silicon (PS) samples were determined from the Atomic Force Microscopy (AFM) measurements. The surface mean root square roughness (σ rms) changes as function of porosity were studied, and the influence of etching time on porosity and roughness was studied too. U...
full textMy Resources
Journal title
volume 3 issue 3
pages 207- 216
publication date 2013-03-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023