Increase of Sliding Mode Controller Stability Limit
Authors
Abstract:
An important consideration in control issues is control of nonlinear systems. Sliding control is among those nonlinear controllers that can control the system desirably in the presence of unstructured uncertainties of carelessness in specifying parameters of the system. In sliding control, also called Variable Structure Control, the main objectives of the controller 
are achieved by introducing a sliding surface. One of the fundamental problems which may occur in sliding control is the chattering phenomenon on unwanted oscillation around the sliding surface. Different solutions are introduced to eliminate chattering. One of the commonest solutions is using a constant boundary layer round the sliding surface. In this paper, efforts are made to reduce chattering and to increase stability of the system by varying the sliding controller with a constant boundary layer. Finally, the mathematical model of a pendulum/cart in the presence of uncertainty is developed and the result of the simulation of the introduced controllers are compared.


similar resources
Fuzzy Sliding Mode Controller Design
* Department of Teacher Training in Electrical Engineering, Faculty of Technical Education, Kings Mongkut Institute of Technology North Bangkok. Abstract This paper describes fuzzy sliding-mode control (FSMC), a fuzzy logic control based upon variable structure techniques. A variable structure approach is designed with guaranteed stability properties. A ball and beam system is used here as an ...
full textSimple homogeneous sliding-mode controller
High-order sliding mode (HOSM) control is known to provide for finite-time-exact output regulation of uncertain systems with known relative degrees. Yet the corresponding universal HOSM controllers are typically constructed by special recursive procedures and have complicated form. We propose two new families of homogeneous HOSM controllers of a very simple form. Lyapunov functions are provided...
full textSliding Mode Controller for the Boost Inverter
The Sliding mode control theory is applied to a sinusoidal output voltage boost inverter with linear load. The boost inverter is intended to be used in UPS design, whenever an AC voltage larger than the DC link voltage is needed, with no need of a second power conversion stage. Operation, control strategy, simulation and experimental results are'included in this paper.
full textSliding Mode Controller for Unstable Systems
The method proposed by Rojas et al.1 for the design of sliding mode controllers (SMC) for unstable first order plus time delay systems, is extended for delay-time constant ratio (*) up to 1.8. The SMC settings obtained for various * are fitted by simple equations. Up to * = 1.2, the method is found to be more robust than that of latest PID Controller proposed by Padmasree et al.2 There is no me...
full textModelling of Geared DC Motor and Position Control using Sliding Mode Controller and Fuzzy Sliding Mode Controller
Geared Dc motors can be controlled by many controllers which may include the conventional PID controllers and various other techniques. The sliding mode control is one of the good controllers which can be used for conditions like disturbances and parameter variations. The system responses are compared when PID controller is applied to the system. SMC methods yield nonlinear controllers which ar...
full textMy Resources
Journal title
volume 25 issue 2
pages 205- 212
publication date 2007-01
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023