Improvement of Impact Toughness of API-X70 Steel Weld metals With Electromagnetic Vibration
Authors
Abstract:
This article doesn't have abstract
similar resources
Size distribution of oxides and toughness of steel weld metals
The trend in strong weld metals is towards microstructures dominated by low carbon martensite. The role of oxide particles introduced into the metal during welding then becomes uncertain. The particles do not seem to affect the nucleation or growth of martensite. This is probably because this phase forms at relatively large driving forces and therefore does not rely on heterogeneous nucleation ...
full textThe Effect of Hydrogen Content and Welding Conditions on the Hydrogen Induced Cracking of the API X70 Steel Weld
In this study, first,diffusible hydrogen of cellulosic electrode E8010-P1 and low hydrogen electrode E8018-G was measured by mercury displacement method according to ISO3690. Then,the effect of preheating and post-heating on the sensitivity to hydrogen inducedcold cracking in welding of 18mm API5L X70 steel with these electrodes was investigated according to ISO17642-2. The results of visual in...
full textThe Effect of Hydrogen Content and Welding Conditions on the Hydrogen Induced Cracking of the API X70 Steel Weld
In this study, first,diffusible hydrogen of cellulosic electrode E8010-P1 and low hydrogen electrode E8018-G was measured by mercury displacement method according to ISO3690. Then,the effect of preheating and post-heating on the sensitivity to hydrogen inducedcold cracking in welding of 18mm API5L X70 steel with these electrodes was investigated according to ISO17642-2. The results of visual in...
full textChanges in toughness at low oxygen concentrations in steel weld metals
Oxides in steel weld metals can initiate fracture or can improve toughness by influencing the development of beneficial microstructures. In this work, the authors conducted experiments in which the oxygen concentration was varied from 20 to 560 ppmw (parts per million by weight) in weld metals with tensile strength in the range 580–780 MPa. It is demonstrated that low and medium strength weld m...
full textTransformation Plasticity in Steel Weld Metals
Professor Ulrich Dilthey’s passion for the science and technology of joining processes is amply reflected in the enormous archive of published work which will forever serve the community. It is a pleasure therefore to be able to present this small story as a tribute to someone who has been a scholar, a gentleman and a leader in this most difficult of subjects. The matter of our everyday world i...
full textMy Resources
Journal title
volume 5 issue 1
pages 93- 104
publication date 2019-09
By following a journal you will be notified via email when a new issue of this journal is published.
Hosted on Doprax cloud platform doprax.com
copyright © 2015-2023