Improvement of Cement Properties Using a Single Multi-functional Polymer

Authors

Abstract:

Cementing of the casing pipes inside the wellbore is considered as one of the most expensive and difficult operations during the well construction process. A low quality cementing job leads to further repair operations, which are usually costly and time-consuming to conduct. Polymer cements are being used for decades in the oil and gas industry due to their improved properties such as sedimentation stability, flexural strength and adhesion. Furthermore, these cements are characterized by improved pore structure, decreased slurry density, decreased porosity and controllable rheological parameters. In this research, a single domestic polymer is added as a cement modifying agent. Domestic additive are easier to buy in the market and are usually cheaper than the imported additives. In addition, using a single additive leads to a simplified logistics operation. Results of the experimental investigations on the main properties of the developed cement systems show that using the proposed polymer in the proper concentration leads to an optimum flow-ability and pump-ability of the slurry, reduced cement water loss, increased strength characteristics and improved adhesion properties of the set cement.

Upgrade to premium to download articles

Sign up to access the full text

Already have an account?login

similar resources

High-temperature tensile properties of a polymer intercalated/exfoliated cement

A polymer intercalated/exfoliated (PIE) cement is synthesized and its high-temperature tensile performance is characterized. Due to the reinforcing effect of the nanointerphase, the flexure strength of the PIE cement is higher than that of ordinary cements by more than an order of magnitude in a broad temperature range. The temperature at which the optimum mechanical properties are obtained is ...

full text

single-step synthesis of multi-component spirobarbiturates using ionic liquids and synthesis of substituted pyridine filled with catalysts supported on solid substrate

in this thesis, a better reaction conditions for the synthesis of spirobarbiturates catalyzed by task-specific ionic liquid (2-hydroxy-n-(2-hydroxyethyl)-n,n-dimethylethanaminium formate), calcium hypochlorite ca(ocl)2 or n-bromosuccinimide (nbs) in the presence of water at room temperature by ultrasonic technique is provided. the design and synthesis of spirocycles is a challenging task becaus...

15 صفحه اول

Technology of Polymer-cement Mixes Preparation with Specified Rheological Properties Technology of Polymer-cement Mixes Preparation with Specified Rheological Properties

In recent years, many new materials appeared on our construction market: polymer pastes, sealants, primers, foam. In addition, dry mixes have been suffered some changes. Previously, for the bonding of stones, leveling and processing of walls and ceilings lime, clay, alabaster, gypsum, and mixtures were used. Before the use, they are diluted with water. The development of dry mixes conducted in ...

full text

investigation of thermal comfort properties of woven sport fabric using blend of estabragh fibers

امروزه لباس در نظر ورزشکاران و کسانی که برای اوقات فراغت خود و یا برای رسیدن به اندامی متعادل، ورزش می کنند؛ بسیار با اهمیت است. احساس مطلوب از لباس در زمره خصوصیات راحتی پوشش می باشد. خصوصیات انتقال رطوبت لباس، در ارزیابی راحتی حسی و حرارتی منسوجات تولید شده از آن ها بسیار مهم است. هدف از این تحقیق، معرفی پارچه جدید است که متشکل از الیاف استبرق با خواص منحصر به فرد می باشد. استبرق لیف طبیعی تو...

Thermal and Rheological Properties Improvement of Oil-based Drilling Fluids Using Multi-walled Carbon Nanotubes (MWCNT)

In this paper, we detail our results for the impact of MWCNT on the thermal and rheological properties of oil-based drilling muds. Our analysis considers the effects of time, temperature, and MWCNT volume fraction. The scanning electron microscopy imaging technique was used to monitor the MWCNTsdispersion quality. The experimental results unveil a considerable enhancement in the thermal conduct...

full text

Experimental data on the properties of polymer-modified cement grouts using epoxy and acrylic resin emulsions

The use of additives to improve the quality of cement grouts is crucial for civil engineering, especially in foundation construction. This article presents experimental data concerning the compressive strength, elastic modulus, bleeding and injectability of microfine cement grouts modified with epoxy and acrylic resin emulsions. Strength properties were obtained at different curing ages. For fu...

full text

My Resources

Save resource for easier access later

Save to my library Already added to my library

{@ msg_add @}


Journal title

volume 31  issue 1

pages  181- 187

publication date 2018-01-01

By following a journal you will be notified via email when a new issue of this journal is published.

Hosted on Doprax cloud platform doprax.com

copyright © 2015-2023